6G Celicas Forums

Welcome Guest ( Log In | Register )

> New member looking to bond, I'm extremely friendly and moist
post Jun 14, 2008 - 7:45 AM
+Quote Post
lowspirit

Enthusiast

Joined Mar 20, '08
From Sweden
Currently Offline

Reputation: 0 (0%)




New member (sort of, first post atleast), owned my 1994 Celica a.k.a(Ivan, as in Crazy Ivan) for about 2½ years and just recently started to get interested in doing stuff to him, I have no bragging rights compared to all the other cars on here but I was never a car guy until I got him, until then it was just getting from A to B, anyways here he is the way he looked the day I picked him up as a pup all new (to me) :




Three things have changed since that picture.

Removed the lights in the front.
They just looked like crap and the wiring as I noticed later was done so crappy it was a miracle it hadn't shorted. This might be a dumb question but what would be the simplest way if I wanted to move my plate down to were the lights were?

Removed the wing.
It was ruined by the sun frown.gif In progress of trying to restore it now actually, any tips and suggestions helpful.


Thieves stole my tires.
So now I have 16" regular ugly rims just so nobody is going to want to steal them.

I've never regretted buying my Celica and it's not once given me any trouble whatsoever engine wise or so and that it runs fairly cheap and looks exactly like I want it is a big plus.

This post has been edited by lowspirit: Jun 14, 2008 - 7:50 AM


--------------------
 
Start new topic
Replies
post Jun 14, 2008 - 8:42 AM
+Quote Post
manphibian



Moderator
*****
Joined Oct 13, '06
From UK
Currently Offline

Reputation: 6 (100%)




Welcome!!! Great shine you have on that paint thumbsup.gif

There is a pile of information in the sticky's at the top of each forum, but i guess you know most of it having had the car for a while.

and yeah.... good luck to Zlatan and the boys against Spain, will be a tough match. smile.gif



I guess you could drill the plate and use zip ties to fix it into the grille?

The wing looks like it needs a machine polish to restore it, or maybe easier just to sand down and respray.


--------------------

Posts in this topic
- lowspirit   New member looking to bond   Jun 14, 2008 - 7:45 AM
- - lubu   Hey welcome to the forum, nice clean looking car. ...   Jun 14, 2008 - 8:37 AM
- - manphibian   Welcome!!! Great shine you have on th...   Jun 14, 2008 - 8:42 AM
- - DEATH   QUOTE (lowspirit @ Jun 14, 2008 - 7...   Jun 14, 2008 - 9:25 AM
- - _mikeE   You must be the only guy who addresses their car a...   Jun 14, 2008 - 6:08 PM
|- - 95st-celica   QUOTE (_mikeE @ Jun 14, 2008 - 7:08 ...   Jun 15, 2008 - 12:24 AM
- - CelicaGT04   you car looks SHIIIIINY!!! GL wi...   Jun 14, 2008 - 8:21 PM
- - Tigawoods   welcome.. ...moist?   Jun 15, 2008 - 12:06 AM
- - CelicaST_CALI   sweeden doing well in the cup,they wont be 4 long...   Jun 15, 2008 - 12:58 AM
- - lowspirit   Thanks for the warm welcome. Sweden did not do so...   Jun 15, 2008 - 5:56 AM
|- - BloodyStupidDavey   QUOTE (lowspirit @ Jun 15, 2008 - 11...   Jun 15, 2008 - 8:51 AM
|- - DEATH   QUOTE (BloodyStupidDavey @ Jun 15, 2008 ...   Jun 16, 2008 - 7:53 AM
|- - GriffGirl   QUOTE (BloodyStupidDavey @ Jun 15, 2008 ...   Jun 16, 2008 - 11:31 AM
|- - southwest2118   QUOTE (GriffGirl @ Jun 16, 2008 - 11...   Jun 16, 2008 - 10:04 PM
|- - GriffGirl   QUOTE (southwest2118 @ Jun 16, 2008 - 8...   Jun 17, 2008 - 2:54 PM
- - CelicaST_CALI   hahahaha thats nice   Jun 15, 2008 - 11:34 PM
- - Tigawoods   ^my god   Jun 16, 2008 - 7:10 PM
- - delusionz   I wouldn't say all cars are female, But I woul...   Jun 17, 2008 - 3:27 AM
- - CelicaST_CALI   and a hummer is a man i suppose...   Jun 17, 2008 - 2:00 PM
|- - D-Man   QUOTE (CelicaST_CALI @ Jun 17, 2008 - 2...   Jun 17, 2008 - 2:31 PM
- - m-i-m-m-   moist, swedish, and friendly... think i've see...   Jun 19, 2008 - 8:55 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 10:58 AM