 where can I find any info???????, jdm 7afe head |
 Apr 8, 2007 - 1:23 AM
|
 
|
 Enthusiast  Joined May 24, '03 From Andrews TX Currently Offline Reputation: 1 (100%)  |
I recently bought a JDM 7afe head and I am planning on swapping onto my 7af(t)e, I just cannot find any info on what to do since the JDM 7AFE does not have a distributor, I have tried searchin, and all I find is "JDM 3SGTE" stuff.
I would like any information I can get, I am not too concerned with the loss of EGR as my car is not using it right now anyways I just have a resistor on it and it seem fine. I have also heard that I can use a ford EDIS system, what do I have to do to do this, I do not want to got over to a standalone, I currently am just running stock ECU with SAFC-II and plan to either looking into PROM tuning or if I cannot do that possibly go to E-manage ultimate. Also is has anyone ever looked into siamesing the intake/head ports on intake side, I have done this on my 350 TPI Camaro, and it has really raised my powerband and output and the runners are very similar.I lost some torque output but am willing to do so to gain some higher RPM HP. this is part of a long term project just I am trying to get as much info as I can. thanks for your help -Daniel This post has been edited by dans_st: Apr 8, 2007 - 2:14 AM -------------------- If anyone is missing NASCAR and it's not on Speed Channel, take a fistful of Skittles, throw them in the toilet and hit the flush handle. Instant NASCAR!!!
|
 |
Replies
|
Jun 18, 2008 - 12:45 PM
|
|
|
Enthusiast Joined Jun 10, '08 From South Africa Currently Offline Reputation: 0 (0%) |
Well my motor is an import that I bought fo my 7AGTE project so no engine bay pics but I do have pics of the motor.My tvis is a sandwitch plate between the intake and head,similar to the series1 4AGE setup.Also its got a distibutor but its fixed so timing cant be adjusted.
Here's a few pics: http://i92.photobucket.com/albums/l2/Ewird/DSCF0867.jpg http://i92.photobucket.com/albums/l2/Ewird/DSCF0862.jpg http://i92.photobucket.com/albums/l2/Ewird/DSCF0865.jpg http://i92.photobucket.com/albums/l2/Ewird/DSCF0862.jpg http://i92.photobucket.com/albums/l2/Ewird/DSCF0863.jpg http://i92.photobucket.com/albums/l2/Ewird/DSCF0864.jpg Seeing that this is a very rare motor on our side of the world I took it apon myself to strip it to the bone so that all its secrets can be revealed. This is a local forum where the tread on this motor can be followed,pics will be added and discriptions given: http://www.tolken.co.za/twincamforum/viewtopic.php?t=30670 Need as much info as possible so if anyone can help PLEASE do so 
-------------------- AE82 1600 Twincam (Series1)
Current 7AGTE 16v project |
Posts in this topic
dans_st where can I find any info??????? Apr 8, 2007 - 1:23 AM
dans_st also since I am probably not hitting the 300whp ma... Apr 8, 2007 - 2:17 AM Kwanza26 QUOTE(dans_st @ Apr 8, 2007 - 6:23 A... Apr 10, 2007 - 2:48 PM dans_st QUOTE Kwanza26 Posted Yesterday, 02:48 PM
What do... Apr 11, 2007 - 12:25 AM
Kwanza26 QUOTE(dans_st @ Apr 11, 2007 - 5:25 ... Apr 11, 2007 - 4:00 PM dans_st QUOTE
Kwanza26 Posted Today, 04:00 PM
Unless you... Apr 11, 2007 - 11:17 PM dans_st I understand the TVIS problem, I plan to remove it... Apr 13, 2007 - 1:48 AM dans_st here is the how-to on how I did my camaro which al... Apr 13, 2007 - 1:54 AM normality78 Good question you've raised dans_st! All t... Apr 18, 2007 - 1:42 AM Kwanza26 Also read Bill Sherwood's comments regarding p... Apr 19, 2007 - 1:55 PM normality78 will give it a read. tks Apr 19, 2007 - 8:43 PM normality78 erm.. guy's, 1 thing i dun really understand.
... Apr 19, 2007 - 9:11 PM Kwanza26 QUOTE(normality78 @ Apr 20, 2007 - 2... Apr 20, 2007 - 1:34 PM normality78 do u think by porting the narrow angle will help a... Apr 20, 2007 - 1:52 PM Kwanza26 QUOTE(normality78 @ Apr 20, 2007 - 6... Apr 20, 2007 - 4:23 PM normality78 hm.... how about porting the exht port and smoothe... Apr 26, 2007 - 3:01 AM Ewie Hi guys.
Im new to the forum and bought a 7AFE mot... Jun 10, 2008 - 5:04 PM dans_st been a while since I even made this post.
head has... Jun 17, 2008 - 10:59 PM dans_st Also I haven't been on here in a while but the... Jun 17, 2008 - 11:12 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 23rd, 2025 - 4:57 PM |