Manual to Power Windows/Locks Conversion, REALLY CLOSE NOW! Need help, see pg 5 Options

[GriffGirl]

I will be undertaking my manual to power windows and locks conversion soon! yay! So in preparation for it, if anyone has a wild hair and is willing to take some pictures of their power setup for me, I would very much appreciate it. Here's what I need:

- pix of behind the door panel so I can see where the rail, motor and lock actuator bolt on
- pix of how the wiring harness is run along that same inside part of the door, up to where the rubber thingie goes into the panel by the door hinge
- pix or description of where the harness comes out after run into the above mentioned panel
- if possible, pix of where the other end of the wiring harness connects to. (back of fuse box under kickpanel?) If pix are too difficult, a description of where this thing goes would be great!
- pix of the door lock relay. I know it's somewhere under the dash, down by the gas pedal. That's all I know. Same goes - if pix are too difficult, a description of what this plugs into.

I'm visually oriented, so please use "landmarks" in any descriptions, and colors, i.e. "next to the gas pedal, above the hump and near the white connector" or whatever.

Thanks so much! I'll follow up with a how-to w/photos when I do the conversion.

This post has been edited by GriffGirl: Feb 26, 2010 - 2:28 AM

[GriffGirl]

Okay, I'm undertaking this project this weekend. I have the DS door panel off and I've discerned which motor goes to which side based on the positioning of the window rail.

Question - do I need to remove the inside of the door (the metal part) in order to remove/replace the existing window track and mount the new one w/its motor? If so, HOW? Which bolts need to unbolt in order to do this? I've figured out which 3 bolts hold in the existing track. Will I be able to unbolt those and pull the window off the track w/out removing the inside of the door? It appears that the thread about changing the power window regulator indicates that I don't need to do that. (but maybe I do, to remove the existing window crank?)

I'm a little lost here, hoping someone can help by morning.

One last thing - where the heck does the door lock actuator go inside the door? I can't quite make sense of which rod connects to which part of the lock, and where it all bolts up.

Thanks!!!!!

This post has been edited by GriffGirl: Jun 21, 2008 - 4:32 PM