 Manual to Power Windows/Locks Conversion, REALLY CLOSE NOW! Need help, see pg 5 |
 Jun 10, 2008 - 4:20 PM
|
 
|
 Enthusiast  Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%)  |
I will be undertaking my manual to power windows and locks conversion soon! yay! So in preparation for it, if anyone has a wild hair and is willing to take some pictures of their power setup for me, I would very much appreciate it. Here's what I need:
- pix of behind the door panel so I can see where the rail, motor and lock actuator bolt on - pix of how the wiring harness is run along that same inside part of the door, up to where the rubber thingie goes into the panel by the door hinge - pix or description of where the harness comes out after run into the above mentioned panel - if possible, pix of where the other end of the wiring harness connects to. (back of fuse box under kickpanel?) If pix are too difficult, a description of where this thing goes would be great! - pix of the door lock relay. I know it's somewhere under the dash, down by the gas pedal. That's all I know. Same goes - if pix are too difficult, a description of what this plugs into. I'm visually oriented, so please use "landmarks" in any descriptions, and colors, i.e. "next to the gas pedal, above the hump and near the white connector" or whatever. Thanks so much! I'll follow up with a how-to w/photos when I do the conversion. This post has been edited by GriffGirl: Feb 26, 2010 - 2:28 AM --------------------  |
 |
Replies
|
Jun 23, 2008 - 5:40 PM
|
|
|
Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
Can anyone with a USDM please check to see where the receptacle for this homeless socket leads to? take a pic maybe? Up behind the fuse panel perhaps? I desperately need to get this figured out; I can't bolt in my window until I can get power to the motor.
-------------------- |
|
Jun 23, 2008 - 5:47 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
the pics were being uploaded..
 the setup is different, that extra plug you have does not look like i have it.soo, i dont think you need it. as you can see the two plugs from the door plug directly into the socketsl, i dont have a pital in Y formation. Oh the red plugs are for the alarm, how complicated that thing is.... initial view...  those red plugs are the alarm..  picture of the door plugs wthout the harness  another side view  even found the alarm.. IMG]http://i254.photobucket.com/albums/hh102/njccmd2002/folding%20mirrors/IMG_3587.jpg[/IMG] and final another better view....  This post has been edited by njccmd2002: Jun 23, 2008 - 6:16 PM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Posts in this topic
GriffGirl Manual to Power Windows/Locks Conversion Jun 10, 2008 - 4:20 PM
njccmd2002 hope this one is good. Jun 10, 2008 - 4:29 PM BloodyStupidDavey QUOTE (GriffGirl @ Jun 10, 2008 - 10... Jun 10, 2008 - 4:45 PM GriffGirl I can't see behind the plastic but it's a... Jun 10, 2008 - 7:58 PM
njccmd2002 QUOTE (GriffGirl @ Jun 10, 2008 - 8... Jun 11, 2008 - 7:50 AM D-Man Griff, I'll try to grab you some pics, I'l... Jun 11, 2008 - 8:36 AM Stu37363 did a walkthrough on changing the regulator, maybe... Jun 11, 2008 - 10:09 AM GriffGirl ^ I read and bookmarked that thread. It's exce... Jun 11, 2008 - 11:15 AM S2CELLY Hope these PICs help.
[/img]
[/img] Jun 12, 2008 - 1:06 PM GriffGirl Those are totally helpful - at this point, I don... Jun 13, 2008 - 6:34 PM brk34 Here are two more pics not that great but I hope y... Jun 14, 2008 - 6:51 PM njccmd2002 i wired my jdm mirrors today, see if this helps... Jun 15, 2008 - 6:00 PM BloodyStupidDavey QUOTE (njccmd2002 @ Jun 16, 2008 - 12... Jun 16, 2008 - 1:41 AM njccmd2002 QUOTE (BloodyStupidDavey @ Jun 16, 2008 ... Jun 16, 2008 - 6:12 AM GriffGirl These pictures are great! They'll make a l... Jun 16, 2008 - 12:02 PM njccmd2002 really dont know what that relay is.... il try lo... Jun 16, 2008 - 12:16 PM BloodyStupidDavey QUOTE (njccmd2002 @ Jun 16, 2008 - 6... Jun 16, 2008 - 1:55 PM GriffGirl He customized the relay for those mirrors though, ... Jun 16, 2008 - 2:12 PM SoundSlut_dotcom autoloc has some good kits. Jun 16, 2008 - 5:10 PM GriffGirl Okay, I'm undertaking this project this weeken... Jun 21, 2008 - 4:27 PM BloodyStupidDavey QUOTE (GriffGirl @ Jun 21, 2008 - 10... Jun 21, 2008 - 4:48 PM BloodyStupidDavey QUOTE One last thing - where the heck does the doo... Jun 22, 2008 - 3:01 PM GriffGirl Okay, this all makes sense. I'm going to have ... Jun 21, 2008 - 9:56 PM GriffGirl Okay - I've made good progress. I've wired... Jun 22, 2008 - 7:23 PM BloodyStupidDavey QUOTE (GriffGirl @ Jun 23, 2008 - 1... Jun 23, 2008 - 2:18 AM GriffGirl QUOTE there was one wiring harness that had nothin... Jun 23, 2008 - 9:27 AM GriffGirl still can't find where that last connector plu... Jun 22, 2008 - 9:19 PM GriffGirl Look, pix!
This is the plug that I believe po... Jun 23, 2008 - 12:21 PM BloodyStupidDavey QUOTE (GriffGirl @ Jun 23, 2008 - 6... Jun 23, 2008 - 2:20 PM njccmd2002 i have to take apart my dash either today or tomor... Jun 23, 2008 - 1:35 PM GriffGirl The passenger side also appears to be lacking a pl... Jun 23, 2008 - 2:39 PM DEATH QUOTE (njccmd2002 @ Jun 23, 2008 - 6... Jun 23, 2008 - 6:25 PM GriffGirl Bad times. I have 2 of the 3 plugs on that junctio... Jun 24, 2008 - 11:03 AM GriffGirl Okay, here's a pic of what mine looks like. As... Jun 24, 2008 - 11:18 AM BloodyStupidDavey QUOTE (GriffGirl @ Jun 24, 2008 - 5... Jun 24, 2008 - 3:08 PM GriffGirl Yes, so I've discovered. Crap-o-rama. I've... Jun 24, 2008 - 5:53 PM BloodyStupidDavey QUOTE (GriffGirl @ Jun 24, 2008 - 11... Jun 25, 2008 - 2:10 AM GriffGirl So, say I had the entire dash harness from said do... Jun 25, 2008 - 3:18 PM alltracman78 Well, your best solution is to replace ALL the wir... Jun 25, 2008 - 8:11 PM Ugglan Griffgirl:
How is the project going?
I think I... Jul 9, 2008 - 3:05 PM GriffGirl I've got it under control, but thank you for t... Jul 9, 2008 - 3:18 PM Ugglan Great!
All luck with the last modifications. B... Jul 9, 2008 - 3:26 PM GriffGirl I've got the whole driver's side wired up.... Jul 10, 2008 - 12:05 PM ETNRIDER QUOTE (GriffGirl @ Jul 10, 2008 - 12... Jul 15, 2008 - 12:29 PM AnaXyd How is it going? Jul 28, 2008 - 5:15 PM GriffGirl I've been so busy I haven't had time to ad... Jul 28, 2008 - 5:35 PM AnaXyd But, isn't it possible to mount some aftermark... Jul 31, 2008 - 1:51 PM GriffGirl I don't know why it'd be worth the time to... Jul 31, 2008 - 2:41 PM AnaXyd Ah I see... But you think you will make this work?... Aug 2, 2008 - 5:53 PM GriffGirl Yes, get the original motors, you can get it from ... Aug 4, 2008 - 12:56 PM AnaXyd Alright, so I better get a stock motor. Do you kno... Aug 5, 2008 - 8:09 AM DEATH Do you still remember the info I gave you before y... Aug 5, 2008 - 10:57 AM ActionClaw QUOTE (DEATH @ Aug 5, 2008 - 11:57 A... Aug 19, 2008 - 2:14 PM GriffGirl Dude, no joke! You have no idea how many times... Aug 5, 2008 - 11:06 AM GriffGirl Oh yeah - AnaXyd - If you already have power windo... Aug 5, 2008 - 11:09 AM DEATH What about finding someone nearby willing to let y... Aug 5, 2008 - 11:14 AM GriffGirl Tell me HOW to use the multimeter first and perhap... Aug 5, 2008 - 11:40 AM DEATH post a pic of the one you got so I know what funct... Aug 5, 2008 - 11:58 AM brk34 I also know how to use a multimeter if you need he... Aug 7, 2008 - 6:42 PM GriffGirl Thanks both of you... updates to come soon (hopef... Aug 7, 2008 - 7:44 PM GriffGirl I believe that's untrue because there have bee... Aug 19, 2008 - 2:55 PM DEATH QUOTE (ActionClaw @ Aug 19, 2008 - 3... Aug 19, 2008 - 3:15 PM AnaXyd How is this project going?
I heard about a guy ... Nov 28, 2008 - 3:18 AM GriffGirl I'm bumping my old thread back from the dead. ... Jun 1, 2009 - 5:49 PM GriffGirl bump
surely there has to be someone out there who... Jun 10, 2009 - 1:05 PM AnaXyd U should check out the partnumber NONG0-00393.15
... Jun 11, 2009 - 4:25 PM GriffGirl Not gonna go with a kit - I have everything I need... Jun 15, 2009 - 12:55 PM AnaXyd Could you write a guide for this? It could be usef... Jun 15, 2009 - 1:11 PM GriffGirl The problem is that it's NOT plug and play, ot... Jun 15, 2009 - 3:21 PM skogs Hi! I've been thinking about this swap mys... Jun 17, 2009 - 11:28 AM GriffGirl Yes, a simple control unit can be created very eas... Jun 17, 2009 - 1:14 PM skogs nice:)
But do you think you could separate the oem... Jun 18, 2009 - 2:20 AM AnaXyd QUOTE (skogs @ Jun 18, 2009 - 2:20 A... Jun 18, 2009 - 5:43 AM GriffGirl RE: Manual to Power Windows/Locks Conversion Jun 18, 2009 - 2:15 PM AnaXyd What? Jun 19, 2009 - 5:11 AM GriffGirl there's no kit, not anything OEM or the likes ... Jun 19, 2009 - 1:19 PM AnaXyd Actually, there is. Just check the partnumber i ga... Jun 19, 2009 - 2:26 PM GriffGirl I did check that part number and it appears to be ... Jun 19, 2009 - 5:27 PM AnaXyd QUOTE (GriffGirl @ Jun 19, 2009 - 6... Jun 20, 2009 - 10:37 AM delusionz I've never seen manual windows & locks on ... Jun 20, 2009 - 4:01 AM GriffGirl 700-800 is absolutely and unequivocally out of the... Jun 22, 2009 - 1:48 PM AnaXyd I was just trying to help you out.. Jun 23, 2009 - 5:27 PM GriffGirl QUOTE (AnaXyd @ Jun 23, 2009 - 3:27 ... Jun 24, 2009 - 11:13 AM DEATH Drive to Texas - problem solved in 3,2... Jun 24, 2009 - 11:44 AM AnaXyd Got the kit checked, and it sucks. A guy at Toyota... Jun 27, 2009 - 6:50 PM GriffGirl ARTistic bump. Jul 1, 2009 - 4:18 PM lagos The window up/down switch has 4 wires:
1. Green wi... Jul 2, 2009 - 8:33 PM GriffGirl QUOTE (lagos @ Jul 2, 2009 - 6:33 PM... Jul 15, 2009 - 5:35 PM viruz_one Any updates? I want power windows and doors and ju... Sep 13, 2009 - 10:43 PM Joe_1985 that seems id be easiest Sep 14, 2009 - 12:56 AM GriffGirl If you'd want to swap the whole door out, I gu... Sep 14, 2009 - 11:38 AM Cavegod heres a wiring diagram, just click power windows o... Sep 14, 2009 - 1:55 PM GriffGirl Yeah I've got that, it's connecting what t... Sep 14, 2009 - 2:01 PM GriffGirl Bringing this back from the dead in hopes that som... Feb 26, 2010 - 2:27 AM GriffGirl Oh I forgot to add if anyone who is REALLY good wi... Feb 26, 2010 - 2:31 AM bmj67 i know the 7. YEL : "UNLOCK WARNING SWITHCH... Feb 26, 2010 - 1:18 PM GriffGirl Maybe I just don't have that thing it's su... Feb 26, 2010 - 2:04 PM bmj67 the part you are missing is a blue box behind the ... Feb 26, 2010 - 8:00 PM |
11 User(s) are reading this topic (11 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 1:10 AM |