7afte and emanage, need some help - search no good Options

[FunkySR]

Hey all.

I have finally got hold of a GReddy Emanage blue and ignition harness for my 1998 7AFTE.

I need some help with this please.

1. I am running a 3SGTE MAP sensor. Do I need to get another one to play with boost settings on emanage?

2. I have the lime green Supra injectors. How do you set these up on emanage?

3. Do I need ignition harness as well...or can I do this at a later stage?

4. All important....is there a how to on the wiring? I currently have SAFC2.

Cheers in advance.

Jay.

[OOBE]

I'm running the Blue on my 7A-FE and you only use two wires out of the whole bunch in the ignition harness. The $35 I spent on the harness was wasted. You definately need the boost sensor for the eManage along with the boost sensor harness to tune based on boost. I bought a non-GReddy boost sensor that has the integrated harness on eBay. It was about $80, versus the $130+ on the GReddy ones. That's great savings. It works perfect. I bought a 3S-GTE sensor and my car would pull timing with it and run rough. In my confusion, I sold it for the same I bought it ($120 shipped) and now I need it. It's a MAP sensor voltage issue. I'm not sure how to explain it, but we know how to correct it. Anyway, I installed the piggyback with a friend of mine. It was too easy. I also installed OEM Evo IX 560cc injectors along with resistors I bought in Radio Shack. Those injectors are very sought after around here. I got them for my Blitz Dual SBC Spec-S, since I bought an MBC for simplicity purposes. I was asking $150 for it. Thanks to Steph for providing me with the wiring diagrams. I needed them that same day, and in less than an hour of writing her, she sent them to me. It if wasn't for those, I wouldn't have been able to accomplish anything.

This post has been edited by OOBE: Jun 29, 2008 - 7:12 PM