6G Celicas Forums

Welcome Guest ( Log In | Register )

> Just lowered, Problems...
post Jun 21, 2008 - 6:25 PM
+Quote Post
mikecelica



Enthusiast
***
Joined Jan 31, '07
From Ontario, Canada
Currently Offline

Reputation: 1 (100%)




I just lowered my car today on tanabe df210. 2"F 1.5R. Or so they say. After everything is done and i drop the car off the jack...it looks a bit lower but not really. Only proof to show that its lower now is the wheel gap is gone. But the front,rear bumper dont seem to have dropped much. And when I turn the steering wheel theres this weird clicking sound coming from the springs as if they are popping in and out of the struts. Could it have to do sometihing with this: While the car was in the air and all the springs and strut assembly put back i dropped the car before tightening the strut bolts on the engine bay and the ones in the trunk? Any help is very appreciated. thanks
 
Start new topic
Replies
post Jul 3, 2008 - 4:07 AM
+Quote Post
Galcobar

Enthusiast
****
Joined Mar 3, '05
From Richmond, B.C.
Currently Offline

Reputation: 0 (0%)




Three immediate possibilities: stuck caliper, unbalanced/unevenly worn tire, or your alignment place didn't do a test drive.

Given you paid for the alignment, I assume, I'd take it back there and ask why you paid them to make your car drive straight when it doesn't. Make them diagnose it.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 29th, 2024 - 4:30 PM