turbo question |
turbo question |
Jun 30, 2008 - 1:14 AM |
|
Enthusiast Joined Nov 16, '06 From Findlay,Oh Currently Offline Reputation: -1 (33%) |
i currently have a hybrid t3 50 trim turbo that i bought used and was set up for internal wastgate..i wanna run an external wastgate but i need to know if you leave the hole open or shut where the internal wastegate acctuator closes and opens.. i was goin to take an edducated guess and assum you have to weld it shut but want to make sure thats right before i go ahead and do that ....Thanx lance
|
Jun 30, 2008 - 1:12 PM |
|
Enthusiast Joined Sep 28, '06 From Montreal, QC, Canada Currently Offline Reputation: 2 (100%) |
Unplug the wastegate actuator and weld the flapper shut.
-------------------- One o'dem crazy Canadian freaks, eh?
|
Jun 30, 2008 - 6:37 PM |
|
Enthusiast Joined Nov 16, '06 From Findlay,Oh Currently Offline Reputation: -1 (33%) |
|
Jul 4, 2008 - 12:53 PM |
|
Enthusiast Joined Jan 9, '05 From green springs ohio Currently Offline Reputation: 1 (100%) |
Unplug the wastegate actuator and weld the flapper shut. all the wastegate stuff has allready been taken off...thnx hi lance , whats up . all you have to do is get a flange with the hole blocked off and then you can run a external wastegate , make sure to get a gasket with it as well . if you need any help just call -------------------- |
Lo-Fi Version | Time is now: December 5th, 2024 - 5:25 PM |