EGR & Emissions help, Trying to find a part # & advice. Options

[D-Man]

Okay, so my check engine light's been going on and off lately, and recently i (actually it was Ngofcukingway) WE checked the code, and it's saying that the EGR valve is failing. But it dosen't stay on, every 15-20 miles it'll go off for about 2-3 miles. So i don't think it's been a total failure yet, however i should try to do something about it.

First off, This weekend i plan to pull the EGR itself and clean the crap out of it, and hope that works, Otherwise I could use some other opinions/advice.

Also, I have no camera right now or i'd show you what i mean, but i'm missing (assumptionaly) a bung of sorts... Let me try to describe, then hit ya'll with a location.
*5sfe - on the driver side, between the Valve cover, and the Intake Manifold @ the Throttle Body area; there is a hose that runs between. This hose has direct access to control the EGR valve (Or some system component that allows the engine to run properly) NOT the line that some have running to the air intake (or back into the throttle body) no, this line is maybe 3-4 inches long, and is connected to what looks like a sensor of sorts... (sorry i have no camera w/ internet access ) Now, this "sensor" is pretty loose and bobbly; so i figure it should be placed in a "Bung" of sorts; and so with out it; It's my belief that the "Sensor" (or maybe it's a thru-tube; IDK - haven't had time to pull it) I believe it may be picking up excess Oxygen and telling my EGR that there is more Oxygen in the engines-air, so there fore it's double burning it. Witch would explain why the EGR is "Failing." It's doing it's job, But bassed on inacurate information; and therefore not doing it's job at all.

Does this make any sense? Or am i WAY fcuking off?

Here is where that "Bung" should be located



I cannot find a part number ANYWHERE for that darn thing... Does anyone know what it is?

Any ideas, opinions, advice, would be greatly appreciated.

This post has been edited by D-Man: Jul 2, 2008 - 8:52 AM

[DEATH]

I'm talking about Emissions. They consider that a seperate part of the test. Call and ask someone but I know I had one fail on my OBDII Celica and they passed me. When I asked them why they said you have 3 strikes your out. Maybe thats only OBDII? Call em. I used the Pennzoil place on 529 near Fry. They were really cool over there and were more interested in my mods than the test - maybe they'll like your wing