![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 15, '07 From Fort Worth, TX Currently Offline Reputation: 12 (100%) ![]() |
I am selling a custom short ram intake that I made. My buddy gave me his old intake from his Civic (I think it was an AEM?), and I modified it to fit the 5S. I painted it black, it used to be red, and you will see that on the bottom there are chip spots that show through, but overall it isn't a bad job at all. The coupler goes from the stock 2.5" to the necessary 3" for the pipe. It also has the drilled hole for a stock air sensor, which I recommend putting a rubber washer in there so it fits snuggly. It sounds great, and helps out with low end torque. Comes with clamps, couplers, and everything necessary for install. The buyer, however, will need a rubber seal for the air sensor hole. SOLD.
![]() ![]() ![]() I am also selling a pair of rear Monroe Sensatrac shocks. Sadly I don't know the mileage of the shocks, since they came on the car, but I'm guessing around 50k. They are VERY stiff, and are in great shape. SOLD. ![]() ![]() I take payment via PayPal. If you have any questions, feel free to PM me. ![]() -Matt This post has been edited by GotToyota: Jul 25, 2008 - 8:59 PM |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Apr 18, '08 From Oakland, bay area, California Currently Offline Reputation: 1 (100%) ![]() |
theres a connector in the back of the tube that i saw on my 95 GT. is there a connector for that stock one?
|
![]() ![]() |
Lo-Fi Version | Time is now: February 16th, 2025 - 4:28 PM |