A few ?s I couldnt find answers to about turboing my 7AFE Options

[phoenix6]

I read the writeup posted on the how to section of the website, Im parting out my 87 Turbo supra ATM and planned on using my CT-26 out of it.... its single entry I know.

The rest of the parts I was confused on a little... Im only looking to get 145 to 150hp from my 7afe while still maintaining reliability if possible.

I was wondering what manifold I use, where I can get the intercooler and IC piping from, so on and so forth. A list of parts is not part of the how to.. if it is, I never noticed it.

TIA for the help guys

BTW, names Phoenix, good friends with Alex (probably known as NgoFckingWay on here, he owns T-Spoon... Manny knows him)

Thnx guys

[Celiracer18]

the CT26 is gonna be pretty big for the 7a and with it being single entry it will be pretty laggy also..

for manifolds its either go with a log style or get a flange and modify a B16/18 to put on it.

I opted to go with a smaller turbo such as an IHI RB5 and a log style manifold. I was hoping to get 180-200 from that but Ill never know since i decided to scrap the project and swap later on.

Along with Niks thread in the stickies, Manny's thread is also very helpful too as many of the same things apply (minus the S series parts).

I know there is a ton of information that can be had on the 7afte if you search long and hard for it all, it takes a while to piece together but its well worth it in the end.