6G Celicas Forums

Welcome Guest ( Log In | Register )

> so i've never done this before...
post Jul 21, 2008 - 7:10 PM
+Quote Post
hockeyplyr24

Enthusiast
**
Joined Dec 22, '04
From O'fallon, MO
Currently Offline

Reputation: 1 (100%)




hey all

i'm sure this has been covered before but i didnt really find what i was looking for when i searched.

i want to lower the car but i'm not sure what all i need to buy. i know i need springs, i'm planning on getting tein springs, but what else do i need? is there a certain type of strut that i should buy? and where is the best place to get this all from? please help me out, sorry if this has been asked many times before..

thank you
 
Start new topic
Replies
post Jul 22, 2008 - 12:55 PM
+Quote Post
GriffGirl



Enthusiast
*****
Joined Feb 7, '07
From Portland, Oregon
Currently Offline

Reputation: 67 (96%)




Just for clairification: is the sway bar end link the same as a "Rear Sway Bar Connector Link"? (Rockauto.com)

Also, if you're buying complete struts (not cartridges) you wouldn't need to replace the strut mounts, correct, since basically that's an integral part of the new strut assembly? They're one in the same, correct?

This post has been edited by GriffGirl: Jul 22, 2008 - 1:01 PM


--------------------
post Jul 22, 2008 - 1:23 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




QUOTE (GriffGirl @ Jul 22, 2008 - 1:55 PM) *
Just for clairification: is the sway bar end link the same as a "Rear Sway Bar Connector Link"? (Rockauto.com)

Also, if you're buying complete struts (not cartridges) you wouldn't need to replace the strut mounts, correct, since basically that's an integral part of the new strut assembly? They're one in the same, correct?

if you're going to buy new end links, it's not worth it to get aftermarket (cheap) ones unless they're much better than stock. here's a post about the twosrus ones with pics for comparison.

The top mounts don't usually go bad unless you do a lot of off roading wink.gif so I wouldn't really replace them, I didn't replace and I have 14 year old ones lowered with no problems. When the top mounts go bad, they make a very loud BANG every time you hit a bump.

If you really want to get something that's going to make a diff then get new ball joints, about $40 a side from the dealer.

recap
parts for lowering (needed)
new KYbs
springs

optional
end links (twosrus)
OEM ball joints
sway bar bushings

more optional if you feel zesty
OEM top mounts
OEM tie rods

edit: oem end links are about $60 each, much better twosrus ones are $70-$75 each

This post has been edited by Batman722: Jul 22, 2008 - 2:22 PM


--------------------

Posts in this topic
- hockeyplyr24   so i've never done this before...   Jul 21, 2008 - 7:10 PM
- - bccentaur3   kyb gr2's. Unless you want to make it hard on ...   Jul 21, 2008 - 9:23 PM
|- - hockeyplyr24   QUOTE (bccentaur3 @ Jul 21, 2008 - 9...   Jul 21, 2008 - 9:34 PM
- - bccentaur3   I got my kybs from ebay.   Jul 21, 2008 - 9:50 PM
|- - hockeyplyr24   QUOTE (bccentaur3 @ Jul 21, 2008 - 9...   Jul 21, 2008 - 9:54 PM
- - bccentaur3   yeah, look into your strut mounts too. While you a...   Jul 21, 2008 - 10:00 PM
|- - hockeyplyr24   QUOTE (bccentaur3 @ Jul 21, 2008 - 10...   Jul 21, 2008 - 10:02 PM
- - bccentaur3   Yeah, you don't need to get kyb mounts. What e...   Jul 21, 2008 - 10:12 PM
- - 808celica   here is a list of things you should need. im takin...   Jul 21, 2008 - 10:15 PM
|- - hockeyplyr24   QUOTE (808celica @ Jul 21, 2008 - 10...   Jul 21, 2008 - 10:19 PM
|- - Batman722   revised QUOTE (808celica @ Jul 21, 2008 ...   Jul 22, 2008 - 12:01 PM
|- - 808celica   QUOTE (Batman722 @ Jul 22, 2008 - 7...   Jul 22, 2008 - 9:51 PM
- - GriffGirl   I'm going to be doing this very soon as well. ...   Jul 22, 2008 - 11:04 AM
- - GriffGirl   Just for clairification: is the sway bar end link ...   Jul 22, 2008 - 12:55 PM
|- - Batman722   QUOTE (GriffGirl @ Jul 22, 2008 - 1...   Jul 22, 2008 - 1:23 PM
- - GriffGirl   Thanks for that input. I would go twosrus - the Ro...   Jul 22, 2008 - 1:39 PM
- - 99GT   I took my endlinkes off from the swaybar and not t...   Jul 22, 2008 - 4:20 PM
- - bccentaur3   Its because you have a 99. most of us don't ha...   Jul 22, 2008 - 9:43 PM
- - hockeyplyr24   thanks for all the help everyone! going to try...   Jul 22, 2008 - 11:48 PM
|- - hockeyplyr24   QUOTE (hockeyplyr24 @ Jul 22, 2008 - 11...   Jul 23, 2008 - 5:14 PM
|- - hockeyplyr24   QUOTE (hockeyplyr24 @ Jul 23, 2008 - 5...   Jul 29, 2008 - 5:05 PM
- - GriffGirl   From what I've found, eBay is your best best f...   Jul 23, 2008 - 6:24 PM
|- - hockeyplyr24   QUOTE (GriffGirl @ Jul 23, 2008 - 6...   Jul 23, 2008 - 6:46 PM
- - Galcobar   Struts do not come with the strut mounts. The str...   Jul 24, 2008 - 5:43 AM
|- - hockeyplyr24   QUOTE (Galcobar @ Jul 24, 2008 - 5:4...   Jul 24, 2008 - 4:55 PM
- - bccentaur3   How did you get a hold of kyb AGX's? I thought...   Jul 29, 2008 - 5:11 PM
|- - hockeyplyr24   QUOTE (bccentaur3 @ Jul 29, 2008 - 5...   Jul 29, 2008 - 5:13 PM
|- - hockeyplyr24   QUOTE (hockeyplyr24 @ Jul 29, 2008 - 5...   Jul 29, 2008 - 5:18 PM
- - hockeyplyr24   QUOTE (hockeyplyr24 @ Jul 21, 2008 - 7...   Jul 29, 2008 - 5:21 PM
|- - hockeyplyr24   QUOTE (hockeyplyr24 @ Jul 29, 2008 - 5...   Jul 29, 2008 - 5:33 PM
- - bccentaur3   LOL..... You better call them.   Jul 29, 2008 - 5:37 PM
|- - hockeyplyr24   QUOTE (bccentaur3 @ Jul 29, 2008 - 5...   Jul 29, 2008 - 5:40 PM
- - bccentaur3   Just exchange them for the rigth stuff. I'm su...   Jul 29, 2008 - 5:56 PM
|- - hockeyplyr24   QUOTE (bccentaur3 @ Jul 29, 2008 - 5...   Jul 29, 2008 - 6:09 PM
- - hockeyplyr24   so everything was going smoothly, until my bump st...   Aug 18, 2008 - 11:27 PM
- - bccentaur3   Yes local auto part stores sell them. NAPA FTW... ...   Aug 19, 2008 - 3:17 PM
- - Batman722   QUOTE (bccentaur3 @ Aug 19, 2008 - 4...   Aug 19, 2008 - 5:01 PM
- - hockeyplyr24   QUOTE (Batman722 @ Aug 19, 2008 - 5...   Aug 21, 2008 - 10:47 PM


Reply to this topicStart new topic
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 22nd, 2025 - 9:20 AM