![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 25, '05 From Fort Wayne, IN Currently Offline Reputation: 14 (100%) ![]() |
Ok, so on the advice of people, I finally moved my oil temp sensor down to the pan and had a bung installed there. Yesterday was the first test, and it STILL was hitting 240*+ on the dang highway after 13 minutes (my highway commute) of 3000+ RPM operation, constant RPM between 3000 and 3700 RPM. It's lower, definitely, but it wasn't quite as hot as last time I drove the car with the sensor mounted in the sandwich adapter.
So what the heck gives? I watch MR2OC and I see guys talking about 200 temps during normal driving, 220 when leaning on it, maybe 240-260 ON A TRACK DAY. I NORMALLY see 240. Odd though, the temp wants to go up at idle with the sensor in the pan, I'm assuming due to lower flow at that low RPM state. I wasn't even being hard on the car yesterday, just lazily driving it around, barely getting into boost at all. And you can tell it's getting DANG hot. I popped the hood last night to clean up a couple of things when I got home from work, and that was a no-go. Too much heat. Thoughts? Ideas? -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Aug 14, '05 From Corpus Christi Tx Currently Offline Reputation: 5 (100%) ![]() |
i hear this a common problem, is this true? also the oil cooler comes stock? I have the 3rd gen 3sgte. should i have an oil cooler? i havent dropped the motor in yet..
|
![]() ![]() |
Lo-Fi Version | Time is now: February 13th, 2025 - 8:18 AM |