![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 2, '07 From Great Western Plateau Currently Offline Reputation: 9 (100%) ![]() |
Doing some major mods on my car, will update this thread regularly...
![]() ![]() ![]() ![]() ![]() ![]() ![]() BTW im doing a gt4 conversion i already got the gt4 hood but im tossing between the stock gt4 and the c-one bumper (pic below),which one shoule i get. Im thinking of c-one... ![]() This post has been edited by lubu: Aug 21, 2008 - 6:45 AM -------------------- ![]() 98% completion --- aaRon |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 2, '07 From Great Western Plateau Currently Offline Reputation: 9 (100%) ![]() |
I need new brakelines and ATM I cant afford any decent ones as they cost a fortune and no point buying crap ones. The good thing is when you get ur ST205 brakes chances are you will also get the brakelines as well, if you do then you will find that with little mods you can make them to work on ur ST204
![]() I tested the connection between the hardline and the brakeline and they are perfect fit, which is a good start and here are two brakelines side by side, the shorter is of course the ST204's. You will need to cut the brackets off as the mountings are completely different between the two. For me I used an angle grinder for the job, gloves, safety galsses and earmuffs are a-must. ![]() ![]() ![]() ![]() After some cutting and grinding you should have something that look like this, remember not to cut or grind into the rubber line or you're going to have problems later. You'll then need to round the hexagon heads and make a smaller grove so that the holding clip can slide across like the ST204's, so they can fit through the mounting plate. ![]() ![]() ![]() ![]() Another 15 mins... ![]() ![]() ![]() ![]() to be cont.... -------------------- ![]() 98% completion --- aaRon |
![]() ![]() |
Lo-Fi Version | Time is now: February 13th, 2025 - 7:12 AM |