Driver side power window |
Driver side power window |
Jul 26, 2008 - 9:24 PM |
|
Enthusiast Joined Nov 4, '07 From utah Currently Offline Reputation: 0 (0%) |
So my window won't roll up. Its been like that since about December. I know huh. Lol. So my dad and I have taken a look at it. And he thinks its the cable thats been stripped. Either way I ordered the power motor and the cable was NOT included and so I'm gonna order that and replace the whole thing just to make sure the whole problem is solved for years to come.
The problem is getting to the motor and getting it out. It looks like a good 5 hour or so job. And we can't figure out if the white metal plate covering the interior even comes off or if we are supposed to just take off those bolts and pull the motor and window out through the holes in the plate. Has anybody ever done this before? I just need to know if we are able to take the plate off or not, how long a process, and where's a good place to buy the cable and how much? Autozone? Online? All that good stuff. Thanks. -------------------- sig removed for size and content.
|
Jul 31, 2008 - 12:51 AM |
|
Enthusiast Joined Jul 29, '08 From N. E. Ohio Currently Offline Reputation: 0 (0%) |
I'm working on something related right now -- plus you may be needing this same info.
Would anyone have (or be able to direct us to where we can find) info regarding the Power window switch or connector 1995 (In my case for a Toyota Celica ST liftback passenger side) Connector wiring:
I'm assuming this is:
Have you gotten to the motor itself yet? what color are the leads? ...or on the other hand, can anyone identify the window switch's 5 terminals? Thanks |
Aug 12, 2008 - 2:25 PM |
|
Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
I'm working on something related right now -- plus you may be needing this same info. Would anyone have (or be able to direct us to where we can find) info regarding the Power window switch or connector 1995 (In my case for a Toyota Celica ST liftback passenger side) Connector wiring:
I'm assuming this is:
Have you gotten to the motor itself yet? what color are the leads? ...or on the other hand, can anyone identify the window switch's 5 terminals? Thanks W/out looking at my car, IIRC the leads to the motor is the solid green wire and solid red wire. If you were to take your door panel off, you'd see that there's a 2 prong connector clipped into the door. The part that's actually clipped to the door comes off the motor, and the part that plugs into that goes to the door harness. If you need to figure out which is up and which is down (I don't remember off hand) you can run 2 leads from the battery and touch them to the motor-side of the connector. -------------------- |
Lo-Fi Version | Time is now: November 27th, 2024 - 3:57 PM |