MULTIPLE AMP WIRING, HELP!!! Options

[mikecelica]

I currently have a 600W 12" Phoenix Gold Sub in a single carpeted box, with a Sony 800W Amp connected to it. I just picked:
I have the 4 speaker system.

- Two 6.5" 200W Phoenix Gold Speakers for the front doors
- Two 5.25" 200W Phoenix Gold Speakers for the rear
- Two 150W Tweeters
- One 1.5 Farad Capacitator
- One 800W Power Akoustik 4 Channel Amp for the speakers

My question is how is all this supposed to be wired up? The tweeters I want to stick on the little triangle things on the doors. Im confused because I understand to get another power wire and another ground wire for the new amp. But the RCA wires and the memory wire, where does that go to, since my deck only has place for only one amp. How does the capacitator get connected? If someone can help me out with this by explaining or a diagram, I'd reealy appreciate it. thanks in advance.

This post has been edited by mikecelica: Aug 16, 2008 - 5:27 PM

[CelicaST_CALI]

u just run normal speaker wire from the amp to the speakers,and u connect to cap right on the power wire,and u try to put it as close to the amp as u can..