6G Celicas Forums

Welcome Guest ( Log In | Register )

> Door lock issues
post Aug 19, 2008 - 11:55 PM
+Quote Post
Por2geezcelica

Enthusiast
*
Joined Aug 17, '08
From NY
Currently Offline

Reputation: 2 (100%)




When i put the key in the drivers door lock, the key wont move the lock left or right, its stuck. The door handle is also loose on the right side so it seems as though one of the nuts that holds it to the door has come loose. I havnt had time to pull the door panel off and take a look at it, but what could be causing the door lock to be stuck and not lock or unlock?

And on the passenger side, i can unlock the doors and i can go to the drivers door and open it, but the passenger side door doesnt open, even if the door is unlocked from the inside. I have to lock the door, and turn the key to the left 2 times and the door pops but locks again, then i have to unlock it again and the door opens.

What exactly is causing these issues with the locks? Is it just worn or cracked connectors?

This post has been edited by Por2geezcelica: Aug 19, 2008 - 11:59 PM
 
Start new topic
Replies
post Aug 20, 2008 - 7:59 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




both rods on each side move freely (one up/down to open the door and the other left/right - lock and unlock) if they aren't connected to the handle. There are clips that hold each rod to the assembly.

bolt = m10x1.5 I *think*

I think the rods are switched on that pass side (but that seems unlikely with the length of the rods).


--------------------

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 6:29 AM