 issues after wiring up jdm side markers |
 Sep 17, 2008 - 5:27 PM
|
 
|
 Enthusiast  Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%)  |
The side markers had a white wire w/ black strip and a green wire. So I figured I'd wire up the white/blackstrip wire to the white/ black strip on the turn signals. Well now the issue is, the side markers and turn signals turn on no problem, but when I use the turn signals, I get nothing. They just stay on. And then when I took off the wires connected to the side markers and tried to use the turns, I get the same problem. They just stay on. But when I use my hazards it blinks without any issues.
-------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
 |
Replies
|
Sep 17, 2008 - 6:03 PM
|
|
|
Enthusiast Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%) |
close thread. I tested this without the key in the start position. Stupid me. But I figured something out. If you wire them up like neg and pos from the side markers to the greens on the turns you can have it stay lit and blink like the turns do.
I got them to blink and stay on when I turn the lamps on SUCKAAAAAA -------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
Posts in this topic
bccentaur3 issues after wiring up jdm side markers Sep 17, 2008 - 5:27 PM
mneal2_92788 so these are teh ones on the fender? if so they do... Sep 17, 2008 - 6:02 PM
azian_advanced ok nvm Sep 17, 2008 - 6:09 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 10:40 PM |