Need machined parts for your celi?, Maybe i can help... Options

[Legit94GT]

So my current jobs gives me access to run a 3 axis machining center that can mill, drill, tap, countersink and burn out the parts, any thing from 3/16" - 1 1/4", and i can even make parts out of Abrassion Resistant metal(has a tougher metalurgical make up) 3/16" - 5/8". I can tap almost all metric threads as well as standard(American).

SO... if you can think and of a something that i can be making for the better good of 6gc.net let me know. Whether its just for you, or something that alot of people could use...

Parts must be 2D(or flat as it were), i cannot ream the holes, or couterbore, no forming, and i CANNOT do anything out of stainless or aluminium.

Detailed pictures or even better a DXF file of what you want emailed to me would be awesome, pricing will depend on how big it is out what material i make it out of.

Im thinking along the lines of making turbo adapters(did on for a VW) or something simlar like that. Square or round, rectangles, triangles, circles, notched rectangles, whatever really...

Not really sure how much help i can be, or why i never thought about this before last night, but figured i'd throw it out there for you guys.

This post has been edited by Legit94GT: Aug 6, 2008 - 11:37 PM

[Consynx]

I could use three 3-bar plates. They are just a square of metal with two slits down them. Used for racing harnesses.
If other people are into this...may be worth it. Wish Aluminum was possible though. without AL and SS, not sure where I'd go to ensure no rust issues.

[Legit94GT]

I could use three 3-bar plates. They are just a square of metal with two slits down them. Used for racing harnesses.
If other people are into this...may be worth it. Wish Aluminum was possible though. without AL and SS, not sure where I'd go to ensure no rust issues.

that would be a piece of cake...

Paint = no rust...