![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 4, '05 From ST PAUL, MN Currently Offline Reputation: 3 (100%) ![]() |
ok just got done putting my 3rd gen map in, been running the 2nd gen map for a bit now...i do have a st205 motor and ecu...so yeah clearing that up now...on my 2nd gen map i can boost fine but i bogg out at like 5500rpm and it climbs up again and then boggs..i have put a third gen map in, off my buddys mr2..and my car ran fine..now that i have my own when try to boost..i dont boost and im running hella lean!!!damn it scared the living crap out of me.. here is the part number 8942020310-100798310050v..any clue of what could be the problem??
it is the right map sensor...but have no clue why i cant boost hard and run hella lean when i do..ooh yeah i did reset the ecu too.. This post has been edited by RUNNIN-LOW: Sep 22, 2008 - 2:47 PM -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 4, '05 From ST PAUL, MN Currently Offline Reputation: 3 (100%) ![]() |
so the big crack in the dp was causing the wideband to read lean and everything was just fine, correct ? lesson for everyone: don't buy cheap ebay dp, it is junk. yep your correct!!!! now im starting all over just order berksracing custom t3/t4 downpipe..decided to go with the garrett t3/t4 turbo..tial external wastegate, speedsource ct26/t3 adapter plate, and using the all mighty HONDA CROME!!!haha as fuel management...decided to dump the turbo xs fpr and got the Aeromotive fpr now.. ill update when i get all the stuff in...ill try to post up cool pictures like you guys when i install haha... -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 20th, 2025 - 12:19 PM |