![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From Maryland Currently Offline Reputation: 8 (100%) ![]() |
So since I really dont have a set 5sfte post just my "need a little help" post, I figured Id make one aswell.
What I have: Built 5sfe: CP pistons - In 3sgte rods - In crank milled to fit the rods - In PP'd head - In Metal head gasket - In ARP head studs - In Turbo parts: 3s Manifold, Turbo, Oil lines, Coolent lines - In, In, In, In DG custom IC piping - In Ebay intercooler (cant remember the size) - In Injectors 460cc - In Walbro fuel pump - In Greddy Type S bov - In KO Racing DP - In DG custom Mid pipe - In SPark plugs gapped properly - In Other stuff: Oil filter - Done Batt relocated to trunk - In Devils own WI kit - In Turbo xs manual boost controller - In Emanage ultimate - here, waiting on the harness. Boost gauge - In EGT Gauge - In AEM UEGO - In Im rather suprized I havent had any major set backs yet (knock on wood!). Ive taken my time and set a daily goal up for myself and tried to stick with it. Even when I got ahead I cleaned up and planned the next day out. This way Ive been 80% ahead of myself on ordering small things like nuts and bolts that I missed or didnt have from used parts. Would be 100% but some how the tech's at my local toyota cant order the correct part even if I give them the part #'s. This post has been edited by 1bwilson: Oct 3, 2008 - 10:37 PM -------------------- Member of Team 5sfTe
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From Maryland Currently Offline Reputation: 8 (100%) ![]() |
Sooo
W/A kit is installed and running, I have a led to install still. Emanage has been here for about 2 weeks but somehow my harness was "missing". So After a few emails to the company I ordered it from I finally got it in yesterday. Also sent it out to Dr. Tweek for a patch harness to be wired up. It should arrive at his shop sometime on the 7th. Cars just basicly sitting waiting for the harness now. I can reinstall the 460's and start messing with the Emanage software also. Im excited to finally be finished with this. Although there is some body work that needs to be done and some front and rear splitters that need to be installed...... It never ends. -------------------- Member of Team 5sfTe
|
![]() ![]() |
Lo-Fi Version | Time is now: February 20th, 2025 - 2:57 AM |