6G Celicas Forums

Welcome Guest ( Log In | Register )

> Car stalls at ignition
post Oct 6, 2008 - 9:59 AM
+Quote Post
reko



Enthusiast
**
Joined Apr 17, '07
From Montreal, QC, Canada
Currently Offline

Reputation: 1 (100%)




I noticed that since it got colder outside, my car stalls in the morning / evening when I do a "cold start".

I turn the key in the ignition and the engine starts but suddently stops by itself, even if i'm still turning the key.

I noticed that ever since i did my oil change for some 10W full syntec (my oil change is due - so i did 5000kms like that), the oil light on the dashboard stays on for a few secs. after I started the car as if oil pressure was low.

Also, sometimes (usually when engine is cold or if i give a lot of gas), when i stop at a stop sign or red light and put it in neutral, the engine feels almost as if it was gonna stall (RPM goes REALLY low... let say 200-300RPM), but then it catches its normal idle (around 800RPM).

Engine is at 197 000 kms so Timing belt / water pump are due at 200 000kms...
I'm thinking it could be the head gasket...

I'm about to sell her... frown.gif I mean, all this + clutch + bushings + front suspension... that's a lot to change... too much for me since I'm probably gonna buy a GT-Four in April 2009 anyway...

This post has been edited by reko: Oct 6, 2008 - 10:05 AM


--------------------


 
Start new topic
Replies
post Oct 6, 2008 - 4:05 PM
+Quote Post
samir0189



Enthusiast
****
Joined Mar 8, '08
From Orlando, Florida
Currently Offline

Reputation: 14 (100%)




My oil light stays on for a few (3-5 seconds) from cold start as well. I don't think that's a problem or related to your stalling. Perhaps it is the fuel filter, have you ever changed that?


--------------------
My F/S Thread!

QUOTE
(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.

QUOTE
Ferdi says (11:29)
No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.
post Oct 7, 2008 - 8:54 AM
+Quote Post
reko



Enthusiast
**
Joined Apr 17, '07
From Montreal, QC, Canada
Currently Offline

Reputation: 1 (100%)




QUOTE (samir0189 @ Oct 6, 2008 - 5:05 PM) *
My oil light stays on for a few (3-5 seconds) from cold start as well. I don't think that's a problem or related to your stalling. Perhaps it is the fuel filter, have you ever changed that?


Like a month or two ago...

QUOTE (Bitter @ Oct 6, 2008 - 8:28 PM) *
keep your foot on the gas to keep it from flooding and stalling, clean the idle speed control motor or replace it.


How do I clean it?

This post has been edited by reko: Oct 7, 2008 - 8:55 AM


--------------------



Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 28th, 2024 - 9:06 AM