 CEL Code 24 : Intake Air temp sensor.., anyone have this problem? |
 Oct 10, 2008 - 5:02 PM
|
 
|
 Enthusiast  Joined Jun 16, '06 From Bowling Green KY Currently Offline Reputation: 7 (100%)  |
i was resetting my timing a second ago and i looked to see if my car was throwing any codes for the hell of it, and not to my surprise it did.
Code 24: "Open Or Short Circuit In Intake Air Temp. Sensor Signal" the stupid haynes manual says let a dealer look at it, but thats why i bought the manual in the first place... so I could look at things. oh well, does anyone have any insight? i'd appreciate it. -------------------- **If you play My Brute, joing the 6gc.net clan!**
--A section of a kid's actual test that had been scanned--  |
 |
Replies
|
Oct 13, 2008 - 3:59 PM
|
|
 Enthusiast Joined Aug 25, '08 From England Currently Offline Reputation: 1 (100%) |
I had this fault once.....cleared the error codes and it has never come back....it might just be a hick up in the system, clear the error codes....go for a drive and recheck the codes, see if its come back.
-------------------- |
Posts in this topic
tonytutino CEL Code 24 : Intake Air temp sensor.. Oct 10, 2008 - 5:02 PM
Bitter with an ohm meter you should be able to see the se... Oct 10, 2008 - 7:40 PM tonytutino checked the connectors and wiring, doesn't app... Oct 10, 2008 - 8:44 PM parriehunter The car wouldnt need to be on. there is just a met... Oct 10, 2008 - 9:14 PM Bitter pull the sensor from the car for testing, it'l... Oct 10, 2008 - 9:52 PM tonytutino well i did just that bitter, resistance did indeed... Oct 12, 2008 - 2:57 PM Bitter see if you can find the sensor range chart on celi... Oct 12, 2008 - 8:59 PM tonytutino even if i checked that and one of the wires didn... Oct 13, 2008 - 3:15 PM tonytutino cool, i'll try that later today man Oct 13, 2008 - 4:08 PM Bitter clear the code and jumper E1 and TE2 to put it int... Oct 13, 2008 - 6:50 PM
GriffGirl If you decide you just want to replace the sensor ... Oct 13, 2008 - 7:05 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 23rd, 2025 - 6:05 AM |