 Another noise issue, (Wheel Bearing & Motor Mount), Noise comming from passenger side front end of 95 GT |
 Oct 15, 2008 - 6:54 PM
|
 
|
 Enthusiast  Joined Feb 10, '06 From Knoxville, TN Currently Offline Reputation: 8 (100%)  |
Hey everyone!!
 I have not been around much the past couple of months due to school, work, baby, etc  !!!! I hope everyone has been doing ok.  Anyway, I have an issue with the front passenger side wheel well of my 1995 GT. Whats happening: Nearly everytime I turn to the left I hear a rubbing sound. Sometimes it happens when I am going straight after a left turn. The noise only comes during one spot of the tire rotation, every time the valve stem is at the 5 o’clock position. The noise does not really sound like metal on metal more like a rubber on metal sound. The car has new brakes, rotors, wheel bearings about 6 months ago. What I have done: Took the wheel off and nothing seemed out of place or lose. There were no signs of any wheel rubbing on the tire or inner fender. Switched the front & rear wheel and the noise continued. What think it may be: Tie rod end Sway bar bushing CV axle Doubt it but may be a stuck Caliper I only have Sunday afternoons to mess with my car so please help me diagnose this problem, any help would be greatly appreciated!  Thanks 6gc!!! A grateful Etnrider This post has been edited by ETNRIDER: Oct 22, 2008 - 1:18 PM --------------------  |
 |
Replies
|
Oct 22, 2008 - 11:43 AM
|
|
 Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
Lol. it was a long time for me, cause i had a series of other issues that occurred. Like lost bolt in the hollow crossmember is FTMFL!!!!! That probably took a good chunk of time. lol.
-------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
Posts in this topic
ETNRIDER Another noise issue, (Wheel Bearing & Motor Mount) Oct 15, 2008 - 6:54 PM
GriffGirl Is there any possibility your wheel is bent? Other... Oct 15, 2008 - 7:25 PM ETNRIDER Ball joint!! I did not think of that! ... Oct 15, 2008 - 7:32 PM ETNRIDER Ok so I have now diagnosed my cars problem with a ... Oct 21, 2008 - 8:41 PM samir0189 I don't know about any aftermarket mounts, i r... Oct 21, 2008 - 9:16 PM ETNRIDER Yeah, I have been searching on the mounts and it s... Oct 22, 2008 - 6:41 AM Bitter your wheel bearing more than likely took a **** be... Oct 22, 2008 - 7:26 AM
ETNRIDER QUOTE (Bitter @ Oct 22, 2008 - 8:26 ... Oct 22, 2008 - 10:18 AM GriffGirl If you have a cherry picker, use that to support t... Oct 22, 2008 - 11:35 AM ETNRIDER Ok well the mechanic up the road (he is a good one... Oct 22, 2008 - 7:00 PM ETNRIDER Ok so I am starting to take my front end apart to ... Oct 24, 2008 - 5:29 PM ETNRIDER May have found my answer here!!
http://ww... Oct 24, 2008 - 5:41 PM azian_advanced you need to find a bolt that threads into one of t... Oct 24, 2008 - 5:42 PM ETNRIDER QUOTE (azian_advanced @ Oct 24, 2008 - 5... Oct 24, 2008 - 6:14 PM GriffGirl Yeah, you definitely have to muscle it a bit... yo... Oct 24, 2008 - 5:56 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 12:28 PM |