Interior Replacement Bulbs/LEDS, Project Underway Options

[3TST]

I have hunted around the forum and found various articles about changing the interior lighting color but really can't find anything on the size of the replacement bulbs/led etc.
I know a few people on the forum have done this so can you help me out please.

So I have started pulling things apart and found the following:

Heater Control Unit
- 2 screw/plug-in type - brown base (with green condoms on)
- 14 green (soldered to pcb)
- 2 orange (soldered to pcb)

Hazard Warning Button
- 1 screw/plug-in type - grey base

Ash Tray
- 1 Wedge type

Ignition Surround
- 1 Wedge type

Lighter Socket
- 1 screw/plug-in type - large grey base

Door Switch (window button)
- 1 green (soldered to pcb)

Problem is I have no idea what size bulbs/leds I need to replace them with.
Do I need resistors?
I've seen a couple of references to web sites selling leds and replacement bulbs BUT Does anyone have part numbers?

Thanks in advance.

This post has been edited by 3TST: Nov 2, 2008 - 6:00 AM

[3TST]

Here's what, I think , I've found out:

Heater Control Unit
- 2 screw/plug-in type - brown base (with green condoms on) REPLACE with NeoWedge NE04
- 14 green (soldered to pcb) REPLACE with 3mm component LED's - RL3-?5014
- 2 orange (soldered to pcb) REPLACE with 3mm component LED's - RL3-?5014

Hazard Warning Button
- 1 screw/plug-in type - grey base REPLACE with NeoWedge NE04

Ash Tray
- 1 Wedge type REPLACE with #74 T1-3/4 Wedge Instrument Panel Bulb with standard LED

Ignition Surround
- 1 Wedge type REPLACE with #74 T1-3/4 Wedge Instrument Panel Bulb with standard LED

Cigarette Lighter Socket
- 1 screw/plug-in type - large grey base ??????? HELP REQUIRED

Door Switch (window button)
- 1 green (soldered to pcb) REPLACE with 3mm component LED's - RL3-??30

Is anyone able to confirm?