3sgte t3/t4, sizing a gaerrett Options

[teamchancery]

Ok ladies and gents ive been asking the question for a while but still look for opinions to make the right choice.

Engine- 4th gen 3sgte(caldina)

cometic head gasket
,arp rod and main bolts,
arp head studs,
JE 9.1 CR pistons,
11lb flywheel,
ACT 6 PUCK AND PP good for 500 lb ft

Electronics-HKS EVC, GREDDY EMANAGE ULTIMATE

DYNO in FWD trim STOCK on 13 psi ....245 whp 246 lbft
DYNO AWD... 15 PSI.... 220 whp 223 lb/ft with emanage street tune with mods listed

Plan for the car- street car for another 1 or 2 with with road racing in the future

Currently car is road car and will participate in a few drag races and track days

Thing is i like the feel of an aggressive low down turbo like the factory one piece tubo on now however i want to upgrade to reach around 350 whp but still get that low down feeling.I like the car responsive to me but still able to say run the quarter at 12 summin and not run out of breath.Where i live has lots of winding roads and fairly short stretches not much highway action ...so i would want summin that i can street race in and not be worrying about falling out of revs

Rev limit now is 7000 rpm
The question i have is what size t3/t4 fits what im looking for.Options i was considering is a 63 back housing w/stage 3 turbine and 60 trim...however i am now considering a 48AR w/stage 3 wheel and 50 trim beacause research show most suggesting 50 trims
.What do you recommend cause frankly money is an option so i want 320-350 preferabbly under 20 psi boost while not over working the turbo while achieving the performance i need
GARRETT IS THE ONLY OPTION AS WHAT I CAN AFFORD NOW IS 550-650 US
HELP
Rev limit

This post has been edited by teamchancery: Oct 25, 2008 - 1:14 AM

[presure2]

you want the "streetbrawler" turbo.
t3/4 46 trim, .63a/r hotside.

www.koracing.com is where to get it.

[teamchancery]

you want the "streetbrawler" turbo.
t3/4 46 trim, .63a/r hotside.

www.koracing.com is where to get it.

Ok ok i see you so you saying sticking with the 63 hotside is fine just focus on the compressor wheel trim.
REALLY appreaciate the link too :thumbsup:Thats what im looking for tutrbo specs specifically suiting a 3sgte.The description of the turbo in the link sounds like exactly like what a wrote




This post has been edited by teamchancery: Oct 25, 2008 - 8:44 AM