 DIY painting tips?, or should i just take it to the pros... |
 Oct 24, 2008 - 9:22 PM
|
 
|
 Enthusiast  Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%)  |
Hey guys,
I recently got some gt-four raiser blocks, they are in primer. I have absolutely no experience painting anything. I do have a large (25gal?) air compressor with the spray attachment for paint. I was wondering if you guys think I could paint these myself, with decent results? I don't want it to look like crud, and I don't want to spend alot to paint such small parts either. If you have DIY painting experience, could you give me some tips, including where to get paint, some detailed steps, tips and tricks, etc? Or, please let me know if this is far too much for a complete amateur to handle and get favorable results, and if i should just take it to a shop. Thanks guys!!!! -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
 |
Replies
|
Oct 25, 2008 - 6:23 PM
|
|
 Moderator Joined Oct 13, '06 From UK Currently Offline Reputation: 6 (100%) |
closed by request...
-------------------- |
Posts in this topic
samir0189 DIY painting tips? Oct 24, 2008 - 9:22 PM
garin i don't do too much with paint, however i do k... Oct 24, 2008 - 10:06 PM
samir0189 QUOTE (garin @ Oct 24, 2008 - 11:06 ... Oct 24, 2008 - 10:13 PM bslik yea as long as you have a basic idea of how to use... Oct 25, 2008 - 3:20 AM 808celica start with rattle cans to get the technique down. ... Oct 25, 2008 - 4:59 AM garin QUOTE (808celica @ Oct 25, 2008 - 5... Oct 25, 2008 - 5:51 AM 808celica QUOTE (garin @ Oct 25, 2008 - 12:51 ... Oct 25, 2008 - 5:55 AM 95celgt first sand them real nice and smooth, keep em clea... Oct 25, 2008 - 2:41 PM samir0189 Yeahhhh, after reading all of your comments I thin... Oct 25, 2008 - 6:09 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 10:59 AM |