6G Celicas Forums

Welcome Guest ( Log In | Register )

> Acceleration vibrations, FIXED! - CV drive axles.
post Oct 27, 2008 - 8:24 PM
+Quote Post
samir0189



Enthusiast
****
Joined Mar 8, '08
From Orlando, Florida
Currently Offline

Reputation: 14 (100%)




Quite recently I've have this vibration, where the entire car shakes once I'm doing greater than 50+mph in gears 3-5(duh), ONLY during acceleration. Its really weird. I intend to get my wheel balances checked soon, although I have my doubts as this being the shaking stops if i coast/brake at the same speeds. There are no issues with turning etc, as I try not to at 70mph.

Also the problem sometimes disappears for short periods of time, and just that, the vibrating stops! Very odd.

I have had my motor mounts changed recently, for the record. Any suggestions?

This post has been edited by samir0189: Nov 26, 2008 - 7:39 PM


--------------------
My F/S Thread!

QUOTE
(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.

QUOTE
Ferdi says (11:29)
No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.
 
Start new topic
Replies
post Oct 31, 2008 - 12:00 AM
+Quote Post
samir0189



Enthusiast
****
Joined Mar 8, '08
From Orlando, Florida
Currently Offline

Reputation: 14 (100%)




The mounts were changed really just recently, within the last 15-20k miles, i don't know exactly when it was. I plan on having a look at them again, but i surely doubt its them, i really try to baby this car, i know shes got extremely high miles and I want things to last as long as possible til i can get the funds to either swap the engine out or rebuild this old 5s, with more power of course.

I try really hard not to do hard launches or shifts or anything that would bust the mounts but i will check again.

The shaking only happens on the highway between 50-70mph, there is no noises during turning,

and well actually, there is a clunking sound coming from the rear still, i thought i had solved it, i thought it was a little rubber thing on the caliper pin but it persists. The noise is a clunkity clunk clunk from dead stop, til about 20mph, from the rear left. could some suspension thing be loose back there and vibrating at highway speeds?

The only thing that gets me is, why does it smoothen out at 70+mph? What could be so selective as to only bother during 50-70?


--------------------
My F/S Thread!

QUOTE
(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.

QUOTE
Ferdi says (11:29)
No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.

Posts in this topic
- samir0189   Acceleration vibrations   Oct 27, 2008 - 8:24 PM
- - Add45   i have the same problem except mines around 60mph   Oct 27, 2008 - 8:35 PM
|- - samir0189   QUOTE (Add45 @ Oct 27, 2008 - 8:35 P...   Oct 27, 2008 - 8:38 PM
- - RickJamesBish   I was gonna say, something to do with the motor fo...   Oct 27, 2008 - 8:39 PM
|- - samir0189   QUOTE (RickJamesBish @ Oct 27, 2008 - 9...   Oct 27, 2008 - 8:42 PM
- - Add45   my car idles terribly as well   Oct 27, 2008 - 8:47 PM
- - RickJamesBish   But if it was an axle, you'd be having this pr...   Oct 27, 2008 - 8:50 PM
- - samir0189   QUOTE (Add45 @ Oct 27, 2008 - 8:47 P...   Oct 27, 2008 - 8:54 PM
- - 95celgt   yea, have this too, i first changed the motor moun...   Oct 28, 2008 - 4:31 PM
|- - CaliJeff   QUOTE (95celgt @ Oct 28, 2008 - 2:31...   Oct 28, 2008 - 4:39 PM
- - RickJamesBish   I forgot about the tranny, and he's probably r...   Oct 28, 2008 - 8:17 PM
- - Remy   If your car shakes going 50+ most likely you just ...   Oct 28, 2008 - 8:24 PM
- - samir0189   Yeah I really need to get the wheels rebalanced to...   Oct 28, 2008 - 9:28 PM
- - nutmeg   I had a problem like this for almost two years, bu...   Oct 29, 2008 - 7:03 PM
- - CaliJeff   Once again, like nutmeg said and I said, i think i...   Oct 30, 2008 - 12:18 AM
- - GotToyota   Get them balanced and go from there. That is the f...   Oct 30, 2008 - 12:25 AM
- - samir0189   I had the wheels balanced today. the problem still...   Oct 30, 2008 - 3:37 PM
- - GotToyota   Have you considered that it could be the motor mou...   Oct 30, 2008 - 8:21 PM
- - Batman722   QUOTE (samir0189 @ Oct 27, 2008 - 9...   Oct 30, 2008 - 8:38 PM
- - Bitter   test for motor mounts: jack engine up slightly wit...   Oct 30, 2008 - 8:43 PM
- - samir0189   The mounts were changed really just recently, with...   Oct 31, 2008 - 12:00 AM
- - samir0189   A bit of an update i guess: Today i had a 4 wheel...   Nov 3, 2008 - 5:03 PM
- - samir0189   Well guys, I did some extensive research and i...   Nov 3, 2008 - 8:10 PM
- - Remy   ^^^ yes thats true your boots don't have to be...   Nov 3, 2008 - 9:56 PM
- - samir0189   +1 so far.   Nov 3, 2008 - 10:11 PM
- - CaliJeff   update?   Nov 4, 2008 - 11:22 AM
|- - samir0189   QUOTE (CaliJeff @ Nov 4, 2008 - 12:2...   Nov 4, 2008 - 11:25 AM
- - nnesto   I had a similar problem a few years ago it was onl...   Nov 22, 2008 - 10:36 AM
|- - samir0189   QUOTE (nnesto @ Nov 22, 2008 - 11:36...   Nov 22, 2008 - 2:10 PM
- - samir0189   WOOT! I fixed it guys! I had both my CV dr...   Nov 26, 2008 - 5:35 PM
- - Cutrara   QUOTE (RickJamesBish @ Oct 28, 2008 - 8...   Nov 27, 2008 - 12:35 PM


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 18th, 2025 - 1:35 PM