6G Celicas Forums

Welcome Guest ( Log In | Register )

> FS: USDM 3S-GTE
post Oct 29, 2008 - 10:38 PM
+Quote Post
zeros

Enthusiast

Joined Oct 18, '07
From Ohio
Currently Offline

Reputation: 0 (0%)




This is the engine from my 92' alltrac, I had a JDM installed and I'm selling the old engine.
I have a USDM 3S-GTE with about 60k miles on it. Mechanic who put in my JDM said it was in very good condition.
The stock turbo bearings are compleatly destroyed, but I'm guessing that wont matter much here....
Nearly all the tubes and wires have been cut and need to be replaced.
It's pretty much a compleate motor without the transmission.
I put Royal Purple oil in it, changed every 2000-3000 miles.
My car is compleatly stock. (well except for the jdm now wink.gif

I have some pictures from a cellphone, I'll post them soon as I can get them off the phone. It's about 2 hours away from me in a garage right now soon as I have a chance I'll bring a good camara to take better pictures if needed.

Compleatly legal in states with emissions inspections.

I will not sell parts off of it

Buyer pays shipping, starting at $1500

you can e-mail me at zeros \at\ 0sanity.com
or message me on aim -> mavenzz

kthx smile.gif

This post has been edited by zeros: Oct 29, 2008 - 10:40 PM
 
Start new topic
Replies
post Oct 31, 2008 - 8:36 PM
+Quote Post
MaskedMan



Enthusiast
*****
Joined Jun 29, '03
From 캘리포니아
Currently Offline

Reputation: 23 (100%)




Is that the engine you are selling? From what I see, the engine does not appear to have EGR, by looking at the intake manifold, it doesn't even have the holes drilled into it or the EGR valve going from the intake manifold to the head. I could be wrong though, the 3sgte I had was a 91, so the EGR location could have been different. Can anyone confirm this?


--------------------


Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 4th, 2024 - 6:42 PM