 Acceleration vibrations, FIXED! - CV drive axles. |
 Oct 27, 2008 - 8:24 PM
|
 
|
 Enthusiast  Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%)  |
Quite recently I've have this vibration, where the entire car shakes once I'm doing greater than 50+mph in gears 3-5(duh), ONLY during acceleration. Its really weird. I intend to get my wheel balances checked soon, although I have my doubts as this being the shaking stops if i coast/brake at the same speeds. There are no issues with turning etc, as I try not to at 70mph.
Also the problem sometimes disappears for short periods of time, and just that, the vibrating stops! Very odd. I have had my motor mounts changed recently, for the record. Any suggestions? This post has been edited by samir0189: Nov 26, 2008 - 7:39 PM -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
 |
Replies
|
Nov 4, 2008 - 11:22 AM
|
|
 Enthusiast Joined Apr 22, '07 From Bay Area, California Currently Offline Reputation: 14 (100%) |
update?
-------------------- You say you don't understand how we go dumb, but have you ever been where i'm from?
-=-] Livin it in tha bay's a lil different [-=- |
|
Nov 4, 2008 - 11:25 AM
|
|
|
Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
QUOTE (CaliJeff @ Nov 4, 2008 - 12:22 PM)  update? I was just in the garage actually, i jacked her up, but i could only see the left side cv joint by the tranny, and it doesnt appear to be busted, but i couldnt really see the other side well at all, my jack wont go high enough, ill have to think of some other way to get it up higher. ooh and i checked the motor mounts JUST in case to rule them out, and they are fine, 100%. 
This post has been edited by samir0189: Nov 4, 2008 - 11:36 AM -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
Posts in this topic
samir0189 Acceleration vibrations Oct 27, 2008 - 8:24 PM
Add45 i have the same problem except mines around 60mph Oct 27, 2008 - 8:35 PM
samir0189 QUOTE (Add45 @ Oct 27, 2008 - 8:35 P... Oct 27, 2008 - 8:38 PM RickJamesBish I was gonna say, something to do with the motor fo... Oct 27, 2008 - 8:39 PM samir0189 QUOTE (RickJamesBish @ Oct 27, 2008 - 9... Oct 27, 2008 - 8:42 PM Add45 my car idles terribly as well Oct 27, 2008 - 8:47 PM RickJamesBish But if it was an axle, you'd be having this pr... Oct 27, 2008 - 8:50 PM samir0189 QUOTE (Add45 @ Oct 27, 2008 - 8:47 P... Oct 27, 2008 - 8:54 PM 95celgt yea, have this too, i first changed the motor moun... Oct 28, 2008 - 4:31 PM CaliJeff QUOTE (95celgt @ Oct 28, 2008 - 2:31... Oct 28, 2008 - 4:39 PM RickJamesBish I forgot about the tranny, and he's probably r... Oct 28, 2008 - 8:17 PM Remy If your car shakes going 50+ most likely you just ... Oct 28, 2008 - 8:24 PM samir0189 Yeah I really need to get the wheels rebalanced to... Oct 28, 2008 - 9:28 PM nutmeg I had a problem like this for almost two years, bu... Oct 29, 2008 - 7:03 PM CaliJeff Once again, like nutmeg said and I said, i think i... Oct 30, 2008 - 12:18 AM GotToyota Get them balanced and go from there. That is the f... Oct 30, 2008 - 12:25 AM samir0189 I had the wheels balanced today. the problem still... Oct 30, 2008 - 3:37 PM GotToyota Have you considered that it could be the motor mou... Oct 30, 2008 - 8:21 PM Batman722 QUOTE (samir0189 @ Oct 27, 2008 - 9... Oct 30, 2008 - 8:38 PM Bitter test for motor mounts:
jack engine up slightly wit... Oct 30, 2008 - 8:43 PM samir0189 The mounts were changed really just recently, with... Oct 31, 2008 - 12:00 AM samir0189 A bit of an update i guess:
Today i had a 4 wheel... Nov 3, 2008 - 5:03 PM samir0189 Well guys, I did some extensive research and i... Nov 3, 2008 - 8:10 PM Remy ^^^ yes thats true your boots don't have to be... Nov 3, 2008 - 9:56 PM samir0189 +1 so far. Nov 3, 2008 - 10:11 PM nnesto I had a similar problem a few years ago it was onl... Nov 22, 2008 - 10:36 AM samir0189 QUOTE (nnesto @ Nov 22, 2008 - 11:36... Nov 22, 2008 - 2:10 PM samir0189 WOOT! I fixed it guys! I had both my CV dr... Nov 26, 2008 - 5:35 PM Cutrara QUOTE (RickJamesBish @ Oct 28, 2008 - 8... Nov 27, 2008 - 12:35 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 1:34 AM |