 found this 3SGE header.. |
 Nov 8, 2008 - 10:32 PM
|
 
|
|
Enthusiast  Joined Aug 29, '08 From AZ, US Currently Offline Reputation: 21 (100%)  |
http://cgi.ebay.com/ebaymotors/3S-GE-JDM-h...1QQcmdZViewItem
i read in Wikipedia that this comes off a 2.0 L engine.. will this fit in a 2.2?? |
 |
Replies
|
Nov 9, 2008 - 1:49 PM
|
|
 Enthusiast Joined Oct 10, '08 From sweet home, OR Currently Offline Reputation: 3 (100%) |
QUOTE (shegarhuney @ Nov 9, 2008 - 1:02 PM)  QUOTE (Galcobar @ Nov 9, 2008 - 5:09 AM) The 3SGE and 5SFE used the same manifold pattern, so it will fit, but it looks like that one is missing the lower section, so you'd have to get a 2-1 (or Y) pipe fabricated to connect the manifold and the front exhaust pipe. You'd also need to install a catalytic converter under the body of the car, as this manifold would remove the stock catalytic converter mounted directly below the 5SFE's manifold -- make sure to get the appropriately sized three-way converter. okie.. thanks for the info.. really appreciate it!!.. it seems to me now.. its easier to get those ebay header where everythin's complete and its just plug & play!!.. but for performance wise.. is there a big difference between the both?? id go with a aftermarket alot of them are made for plug and play and you shall get way more flow. -------------------- "she can polish my strut bar anytime As long as her blow-off valve's in good order"
 |
Posts in this topic
shegarhuney found this 3SGE header.. Nov 8, 2008 - 10:32 PM
Galcobar The 3SGE and 5SFE used the same manifold pattern, ... Nov 9, 2008 - 4:09 AM
shegarhuney QUOTE (Galcobar @ Nov 9, 2008 - 5:09... Nov 9, 2008 - 1:02 PM Galcobar The 3SGE used a tubular design, as opposed to the ... Nov 9, 2008 - 11:27 PM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 20th, 2025 - 3:26 PM |