 Heater Controls - PCB Polarity ?, Help Please |
 Nov 10, 2008 - 5:21 PM
|
 
|
 Enthusiast  Joined Sep 27, '02 From UK Currently Offline Reputation: 1 (100%)  |
I've started desoldering the LEDs from the Heater Control PCB.
I have now received my new LEDs. However, they have a + and - wire. The longer of the 2 wires being positive. Problem is...I'm trying to work out the polarity on the PCB. That is, the positive and negative circuits.    I also have the same question relating to the window switch.  Can anyone help please? |
 |
Replies
|
Nov 11, 2008 - 8:18 AM
|
|
|
Enthusiast Joined Sep 27, '02 From UK Currently Offline Reputation: 1 (100%) |
Cheers mate.
QUOTE The triangle points to a vertical bar: >| ...symbol for a diode That's what through me on the window switch. OK for the window switch now.  But for the PCB... QUOTE You need to look at the side of the PCB with the silkscreen on....look for symbol... I assume the silkscreen is the green side with the track on. Problem is, I don't seem to be able to see that symbol anywhere.  Can you tell I haven't done this before  |
Posts in this topic
3TST Heater Controls - PCB Polarity ? Nov 10, 2008 - 5:21 PM
BloodyStupidDavey You need to look at the side of the PCB with the s... Nov 10, 2008 - 6:21 PM
BloodyStupidDavey QUOTE (3TST @ Nov 11, 2008 - 1:18 PM... Nov 12, 2008 - 5:08 PM GriffGirl QUOTE (BloodyStupidDavey @ Nov 12, 2008 ... Nov 12, 2008 - 7:25 PM WWSideWinder Hi 3TST
OK I finished my AC Unit last night and I... Nov 11, 2008 - 11:40 AM 3TST Thanks for your help.
LEDs are coming out so much ... Nov 11, 2008 - 5:45 PM WWSideWinder http://www.6gc.net/forums/index.php?showtopic=6333... Nov 11, 2008 - 6:58 PM brk34 you could power the board and with a DMM and check... Nov 12, 2008 - 7:33 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 10:15 PM |