 key ring light stay on?, can you keep it on? |
 Nov 5, 2008 - 4:11 AM
|
 
|
 Enthusiast  Joined Nov 24, '06 From Kansas City Currently Offline Reputation: 2 (100%)  |
how do you keep the key ring light on while driving? it fades out after about 5seconds after door is shut
|
 |
Replies
|
Nov 11, 2008 - 11:44 PM
|
|
 Enthusiast Joined Apr 19, '07 From Dayton, Ohio Currently Offline Reputation: 7 (100%) |
wired it in to the ciglighter bulb, for the clueless outthere power is green wire, and white with black stripe is ground... it takes about 2.5 ft of wire to give the bulb a healthy amount of slack. use solder and heat shrink so you wont have to do it over when the wires get loose under a ghetto electrical tape splice...
im wanting a brighter bulb, maybe an led... the ring isnt the same brightness all around, guessing its typical.... any tips? also, the cig lighter bulb is burnt out any opinions on an led to fit? -------------------- poopra sellout... 88targa, 50trim ct, 383lsd, and shreadin tires like its my job!!!
 QUOTE (RUNNIN-LOW @ Feb 17, 2009 - 1:53 PM)  buying a rusty car is like dating a girl with a bush! if u like it like that go for it.. :D if u can repair and make it look better then its all the better for u!... |
|
Nov 11, 2008 - 11:58 PM
|
|
 Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
QUOTE (boosted95 @ Nov 11, 2008 - 11:44 PM) wired it in to the ciglighter bulb, for the clueless outthere power is green wire, and white with black stripe is ground... it takes about 2.5 ft of wire to give the bulb a healthy amount of slack. use solder and heat shrink so you wont have to do it over when the wires get loose under a ghetto electrical tape splice... im wanting a brighter bulb, maybe an led... the ring isnt the same brightness all around, guessing its typical.... any tips? also, the cig lighter bulb is burnt out any opinions on an led to fit? I just recently decided to take off the nasty green thing from that bulb on the keyring. The light gets alot brighter without it, and to color it, i used a red straw from a gas station i think, and it glows amazingly. the whole thing lights up right around, and its gives JUST the right amount of color. cant help with the cig lighter thing, i condemned mine. This post has been edited by samir0189: Nov 12, 2008 - 12:08 AM -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
Posts in this topic
alaNi key ring light stay on? Nov 5, 2008 - 4:11 AM
Fastbird Rewire to it's own source. Nov 5, 2008 - 8:53 AM boosted95 my lit ring is in the mail, so i was wondering the... Nov 6, 2008 - 10:11 PM boosted95 so, im gonna splice into the clock power line i gu... Nov 10, 2008 - 7:19 PM WWSideWinder I used Joined it to the light on the cigarette lig... Nov 11, 2008 - 12:44 AM
WWSideWinder Boosted95
Hi there to even out my light (not perf... Nov 12, 2008 - 2:54 AM boosted95 QUOTE (WWSideWinder @ Nov 12, 2008 - 7... Nov 14, 2008 - 1:58 AM |
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2025 - 7:51 PM |