6G Celicas Forums

Welcome Guest ( Log In | Register )

> 1 post 2 questions
post Nov 13, 2008 - 9:32 PM
+Quote Post
pipes

Enthusiast
***
Joined Apr 23, '08
From boston MA
Currently Offline

Reputation: 5 (100%)




1)if i put a 4inch long pipe directly on the turbo with filter is that bad?

2) if i do this and keep the stock bov could i just mount it somewhere else?

once again thanks in advance!!!
 
Start new topic
Replies
post Nov 17, 2008 - 5:49 PM
+Quote Post
_Jim_



Enthusiast
***
Joined Sep 22, '08
From Bergenfield
Currently Offline

Reputation: 5 (78%)




I am going to be running a 4" intake on my setup, I got all the parts I needed in yesterday. Hux racing has had massive successes with a 4"intake over a 3" intake. So between the added performance, the enhanced/louder turbo whistle (turbo whistle is enhanced with a 4" intake due to more resonating area.....or so I have heard) , the killer look of a massive 4" intake, and Manny's awesome welding skills, how could I pass up the opportunity. thumbsup.gif

Hopefully I can get Dustin (Batman) to go to the dyno with Manny when he runs my car. I would like to see what kind of gains a 4" intake actually has over a 3"intake (if any), because Hux racing has only claimed having bigger gains, but I haven't found any back to back numbers to prove it. After a few runs with my 4" intake, I will see if Dustin will let Manny take a couple runs with his 3" intake on my car for a true back to back comparison.

It would also be nice to see how similar the 2 motors (both GEN3's) are in HP and TRQ at the same boost levels. And then add in the water injection to see how those numbers change, and how AFR's will change. Should be very informative/interesting, I hope he has some free time to kill with Manny when he goes to the dyno, I KNOW he is wondering/curious as to what power he is making.


--------------------
330whp 309ft/lbs @ 21 PSI
post Nov 17, 2008 - 5:56 PM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




QUOTE (_Jim_ @ Nov 17, 2008 - 5:49 PM) *
I am going to be running a 4" intake on my setup, I got all the parts I needed in yesterday. Hux racing has had massive successes with a 4"intake over a 3" intake. So between the added performance, the enhanced/louder turbo whistle (turbo whistle is enhanced with a 4" intake due to more resonating area.....or so I have heard) , the killer look of a massive 4" intake, and Manny's awesome welding skills, how could I pass up the opportunity. thumbsup.gif

Hopefully I can get Dustin (Batman) to go to the dyno with Manny when he runs my car. I would like to see what kind of gains a 4" intake actually has over a 3"intake (if any), because Hux racing has only claimed having bigger gains, but I haven't found any back to back numbers to prove it. After a few runs with my 4" intake, I will see if Dustin will let Manny take a couple runs with his 3" intake on my car for a true back to back comparison.

It would also be nice to see how similar the 2 motors (both GEN3's) are in HP and TRQ at the same boost levels. And then add in the water injection to see how those numbers change, and how AFR's will change. Should be very informative/interesting, I hope he has some free time to kill with Manny when he goes to the dyno, I KNOW he is wondering/curious as to what power he is making.


im sure dustin will be driving his own car on the dyno..lol
but ya, im quite qurious to see the diffrence between the 2.


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Nov 17, 2008 - 7:50 PM
+Quote Post
pipes

Enthusiast
***
Joined Apr 23, '08
From boston MA
Currently Offline

Reputation: 5 (100%)




QUOTE (presure2 @ Nov 17, 2008 - 6:56 PM) *
QUOTE (_Jim_ @ Nov 17, 2008 - 5:49 PM) *
I am going to be running a 4" intake on my setup, I got all the parts I needed in yesterday. Hux racing has had massive successes with a 4"intake over a 3" intake. So between the added performance, the enhanced/louder turbo whistle (turbo whistle is enhanced with a 4" intake due to more resonating area.....or so I have heard) , the killer look of a massive 4" intake, and Manny's awesome welding skills, how could I pass up the opportunity. thumbsup.gif

Hopefully I can get Dustin (Batman) to go to the dyno with Manny when he runs my car. I would like to see what kind of gains a 4" intake actually has over a 3"intake (if any), because Hux racing has only claimed having bigger gains, but I haven't found any back to back numbers to prove it. After a few runs with my 4" intake, I will see if Dustin will let Manny take a couple runs with his 3" intake on my car for a true back to back comparison.

It would also be nice to see how similar the 2 motors (both GEN3's) are in HP and TRQ at the same boost levels. And then add in the water injection to see how those numbers change, and how AFR's will change. Should be very informative/interesting, I hope he has some free time to kill with Manny when he goes to the dyno, I KNOW he is wondering/curious as to what power he is making.


im sure dustin will be driving his own car on the dyno..lol
but ya, im quite qurious to see the diffrence between the 2.

Oooo can I join the madness?
We can see the drivetrain loss

Posts in this topic


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 29th, 2024 - 2:48 PM