Removing the high beam headlight |
Removing the high beam headlight |
Nov 11, 2008 - 9:46 PM |
|
Enthusiast Joined Oct 28, '08 From CT Currently Offline Reputation: 0 (0%) |
When i got my celica the driver side inside headlight had some water in it and the bulb is out. I replaced the bulb but i wanted to take the headlight out and clean it. Cant figure out how to take it apart, seems like you have to do alot more work just to get this out. Does anybody have some instructions on how this is done. Would be appreciated
Thanks Rob -------------------- 96 Celica gt 5 spd 218k intake, header, rear strutbar, new clutch...again :/
02 Saab 9-5 silver Aero 5 speed 150k w/ 80k mile engine, new clutch, k&n intake, turbos xs bov 92 sandstone grey 3000gt vr4 upgraded turbos, turboback exhaust, intake, mbc, walbro 91 black 3000gt vr4 needs work stock turbos |
Nov 25, 2008 - 3:47 PM |
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Drill two holes in the HB using a small drill bit, one above the water line, one at the bottom. The water will run out then you can seal the holes with a dab or two of superglue. [EDIT - Drill the holes in the back plastic - not in the front glass obviously]
Cleaning them out properly will require taking the bumper off and washing them as you would a dish I would imagine. This post has been edited by DEATH: Nov 25, 2008 - 3:48 PM -------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Lo-Fi Version | Time is now: January 10th, 2025 - 12:59 AM |