4" intake on 3rd gen 3sgte, disscussion topic! GIVE YOUR 2 CENTS! Options

[presure2]

hey guys, as you know, jim now has the 3rd gen 3s in his car, and after doing some research around various boards, he decided he wanted to try a 4" intake.

now, before you all go nuts, the guys down @ hux racing in florida claim HUGE gains with a 4" over a 3" intake, and have posted some results.

here are a couple "copy paste" deals from mr2.com:

We always figured my street car made at least 280 rwhp. Until we dynoed it on our new Dynojet. The only mods are: our air intake mod 4", Blitz SBC boost controller, our 3" single tip exhaust, & boost cut defeated.

328 rwhp & 316 rwt

This is on a maxed out ct20b, stock ecu, stock injectors, genIII fuel pump, & stock intercooler. This was attained using 100 octane.

heres the dyno sheet:

The GenIII swaps we do I always push them to use our air intake mod since we have seen consistent results using that combo (4" K& N air filter, 4" inlet tube, custom coolant relocator hose).

so, with that in mind, (and the fact that hux racing wants 400$ for somthing they wont even show you a picture of) we decided to give it a shot.

since the inlet of the '20b is only 2.75" (yes, i know its a mm mesurement, but for all intents we all use a 2.75" reducer anyway..lol) we had to find a way to reduce the 4" pipe down to that.

since we couldnt find anyone who makes a 4" to 2.75" reducer, and the fact that i thought it would be kinda flimsy, if we could find one, i headed over to burns stainless to see what they had.

they carry 2 diffrent styles of "trumpets" (reducers) a longer style, and a shorter. so we got the 4" to 3" trumpet, and because of the limited room we have to work with, we chose the shorter style.
heres a pic of what it looks like, with the coke can for size reference.




once i got that in, and the coupler to mate the pipe to the turbo, i went out to the garage, and cut the pipe to set it up:



thats the basic idea, i just need to weld a couple bungs for the IAC and catch can, and weld it up.

im hoping we can get back to back dynos at some point real soon with a 3" intake vs this one, the only thing i need is a 4" k&n, or a 3" ebay special so the tests will be the same with no variables.
if everything shakes down right, we could do this on both dustin, and jims cars, to get more results on diffrent cars, to see what kinda results we can truly get.


discuss!!

[lagos]

It will be really interesting to see your dyno results, Manny.

Did they ever post a before dyno on the same car?
Its kind of odd to think that a bigger intake would give any kind of gains, because the actual 2.75in turbo inlet is aways going to be the bottle neck. The real gains seem to be from the fact that they were able to hit 24psi of boost on the ct20b. I know from talking to califcarm, he had to use helper springs on his wg just to be able to run around 20psi on the street, and on the dyno he claimed to be able to hit a little bit less then that. So perhaps the real gains from this intake might not be seen at pump gas boost levels but only when pushing the turbo to its limits with race gas or a lot of alcohol injection.
Either way, thats a really nice intake.
Damn you 3rd gen guys and your lack of afm....damn yooooouuuu.. lol

Do you have a link to the original thread this came from?