Hood Spoiler Installed Options

[vincent_doggy]

The underneath of the hood, 2 holes are ready, just need to remove the lid


However, there are another 2 holes u require to drill

Masking tape

Place the Hood spoiler on the masking tape and use a pen to mark the place for drilling


Then drill the holes one by one




I use a cirgarette butt to drip some paint on the hole to avoid corrosion

Then tuck the spoiler into those holes and screw back with









This post has been edited by vincent_doggy: Nov 27, 2008 - 2:58 PM

[Urputus]

Hmmm... very good job! And pretty interesting technique - using the sticky tape to avoid dents around the drilled holes. Did it help?