4" intake on 3rd gen 3sgte, disscussion topic! GIVE YOUR 2 CENTS! Options

[presure2]

hey guys, as you know, jim now has the 3rd gen 3s in his car, and after doing some research around various boards, he decided he wanted to try a 4" intake.

now, before you all go nuts, the guys down @ hux racing in florida claim HUGE gains with a 4" over a 3" intake, and have posted some results.

here are a couple "copy paste" deals from mr2.com:

We always figured my street car made at least 280 rwhp. Until we dynoed it on our new Dynojet. The only mods are: our air intake mod 4", Blitz SBC boost controller, our 3" single tip exhaust, & boost cut defeated.

328 rwhp & 316 rwt

This is on a maxed out ct20b, stock ecu, stock injectors, genIII fuel pump, & stock intercooler. This was attained using 100 octane.

heres the dyno sheet:

The GenIII swaps we do I always push them to use our air intake mod since we have seen consistent results using that combo (4" K& N air filter, 4" inlet tube, custom coolant relocator hose).

so, with that in mind, (and the fact that hux racing wants 400$ for somthing they wont even show you a picture of) we decided to give it a shot.

since the inlet of the '20b is only 2.75" (yes, i know its a mm mesurement, but for all intents we all use a 2.75" reducer anyway..lol) we had to find a way to reduce the 4" pipe down to that.

since we couldnt find anyone who makes a 4" to 2.75" reducer, and the fact that i thought it would be kinda flimsy, if we could find one, i headed over to burns stainless to see what they had.

they carry 2 diffrent styles of "trumpets" (reducers) a longer style, and a shorter. so we got the 4" to 3" trumpet, and because of the limited room we have to work with, we chose the shorter style.
heres a pic of what it looks like, with the coke can for size reference.




once i got that in, and the coupler to mate the pipe to the turbo, i went out to the garage, and cut the pipe to set it up:



thats the basic idea, i just need to weld a couple bungs for the IAC and catch can, and weld it up.

im hoping we can get back to back dynos at some point real soon with a 3" intake vs this one, the only thing i need is a 4" k&n, or a 3" ebay special so the tests will be the same with no variables.
if everything shakes down right, we could do this on both dustin, and jims cars, to get more results on diffrent cars, to see what kinda results we can truly get.


discuss!!

[darthripley]

i'm interested to see the results, but i personally feel there would be many other bottlenecks at higher boost levels that would yield more hp such as the intake manifold & throttle body.
obviously 4" intake piping is substantially cheaper than the above mentioned upgrades.
just because you can run 20+psi on a ct20 doesn't mean it's effecient - you simply reach a point where you are truly just blowing hot air & it won't make anymore hp.

for the dyno testing are you all going to run on pump or higher octane 'race' gas?

This post has been edited by darthripley: Dec 1, 2008 - 3:28 PM