Grinding in 3rd gear |
Grinding in 3rd gear |
Mar 14, 2003 - 12:21 PM |
|
Enthusiast Joined Mar 14, '03 From College Station, Texas Currently Offline Reputation: 0 (0%) |
Hey Folks,
I just replaced my original clutch at 131K mi. I installed an Exedy Sportline clutch Kit. Resurfaced the Flywheel and used the same oil that the dealership uses. Now, when cold, its hard to shift into 1st, and when shifting into 3rd, all the time, it grinds a little. I did not grind before the clutch replacement, but the original clutch was slipping, so that 's why I replaced it. Any ideas about why its hard to shift into 1st and grinds into 3rd? Thanks, SKippy344 |
Dec 3, 2008 - 2:13 AM |
|
Enthusiast Joined May 6, '08 From Lisarow, NSW, Australia Currently Offline Reputation: 0 (0%) |
my 3rd gear has started doing this yet it only does it ocastionly and its normaly completely fine, I even had it happen when I double clutched, anyone have any idea? Its time to rebuild the tranny or replace it. yay haha, my dad said to bleed the clutch fluid, and I just did a transmission fluid like 5000km ago. |
Lo-Fi Version | Time is now: November 28th, 2024 - 4:49 PM |