Interior Replacement Bulbs/LEDS, Project Underway Options

[3TST]

I have hunted around the forum and found various articles about changing the interior lighting color but really can't find anything on the size of the replacement bulbs/led etc.
I know a few people on the forum have done this so can you help me out please.

So I have started pulling things apart and found the following:

Heater Control Unit
- 2 screw/plug-in type - brown base (with green condoms on)
- 14 green (soldered to pcb)
- 2 orange (soldered to pcb)

Hazard Warning Button
- 1 screw/plug-in type - grey base

Ash Tray
- 1 Wedge type

Ignition Surround
- 1 Wedge type

Lighter Socket
- 1 screw/plug-in type - large grey base

Door Switch (window button)
- 1 green (soldered to pcb)

Problem is I have no idea what size bulbs/leds I need to replace them with.
Do I need resistors?
I've seen a couple of references to web sites selling leds and replacement bulbs BUT Does anyone have part numbers?

Thanks in advance.

This post has been edited by 3TST: Nov 2, 2008 - 6:00 AM

[3TST]

Success ...well a certain amount anyway.
Finished soldering the LEDs in my heater control unit and I'm really pleased with the results
(apart from 3 that don't work) - and I didn't get any spares
I left the 2 amber LEDs as is and replaced all the other 14 with red LEDs.
I replaced the 2 twist-lock bulbs with white superbright twist-lock bulbs.
The result is that it all matches up with my head unit.
Incredibly, more by luck than judgement, the white superbright twist-lock bulbs in combination with the clear plastic interior of the heater control unit gives off a slight pale blue/white light which matches the stereo perfectly.
I tried to take some pics but they came out cr*p because the flash kept going off.
I'll try and take some other pictures when I can and post here.