Wrecked Alloys!!!, Just had to replace all my wheels on my Celi.... |
Wrecked Alloys!!!, Just had to replace all my wheels on my Celi.... |
Nov 24, 2008 - 1:22 PM |
|
Enthusiast Joined May 16, '07 From Newcastle UK Currently Offline Reputation: 0 (0%) |
Hi guys/girls
So I'm driving down the road the other day on my way home from work when I see something emerge from under the car in front. By the time I realised what it was (a brick), I'd hit it. Now I'm doing like 70mph at the time and didn't have much time to avoid it. Anyway, there was this gut-wrenching BANG!!! followed by a wobbling of the steering wheel. When I got home, I took the drivers side front wheel off and inspected the damage. Only thing was, there wasn't any! So I put the wheel back on and thought nothing more of it until the following day. Next day I went out in the car with my Girlfirend. Straight away, she started going on about the wobble on the steering wheel and a low frequency "buffetting" noise and said she thought there was something seriously wrong with my car. So I swing by my usual wheel/tyre place and have them check the wheel balancing. He puts the wheel on his machine and hey presto - bent as a £7 note! Had to replace ALL of my wheels there and then! B*llocks! Anyway I settled for some Wolfrace Triads. I've got no pics as yet but I'll post 'em as soon as I have. Rant over! P.S Does anyone fancy buying 3 really good wheels and ever-so-slightly buckled wheel for their Celi???.....thought not This post has been edited by Racer_J: Nov 24, 2008 - 1:23 PM -------------------- |
Dec 5, 2008 - 6:17 AM |
|
Enthusiast Joined Apr 16, '08 From Czech Republic Currently Offline Reputation: 0 (0%) |
No doubt .. these must be nice as well only pics are not as reality sometimes. Is your suspension stock or are you little bit lower ? My celi“s way to low and unfortunately roads in Czech Republic are not friendly to these type of suspension. :-(
I“ve pm“ed you .. -------------------- “95 T20 GT
|
Lo-Fi Version | Time is now: November 23rd, 2024 - 8:59 PM |