4AGZE Swap Options

[mikecelica]

I've been planning on turboing my st for a while now, got all the parts, but after going through all the costs with parts and labor I've come to a total of $3100, which I think is waay too much for 40-50hp (If even that). I wouldnt be getting much horsepower, plus risk damaging the engine, and say goodbye to the toyota reliability. So Im thinking now of just swapping in a 4agze, Ive been reading up alot about this and what i wanna know is why people think its such a difficult swap and that only few people have attempted it? Ive gone through this with a mechanic at toyota dealership that I work at. And he too says its the most simplest of swaps. All i really need is the engine,ecu,wiring harness,4age flywheel with using my 7afe tranny and same motor mounts. Thats pretty much it, unless I put in FMIC, but I've heard they benefit more from TMIC. The 4agze from the Levin from has about 170hp at stock psi (7psi) and at full boost (14psi) it should reach around 190hp or more with some pulleys and an safc. Plus another advantage would be that this engine was built to handle boost so its alot more safe than a 7afte. This mechanic has a 88 corolla gts with the 4agze and an mr2 4agze and they are faast. So I just wanna hear some thoughts on this. thanks

This post has been edited by mikecelica: Mar 14, 2008 - 7:21 PM

[Stambo]

I've been reading up on this swap for awhile and i'm still planning to swap for the 4agze. i figured it be a good autox engine since the high revs. One question, if i find the engine out of a corolla/levin the powersteering will work in our cars... Yes? I've heard that the mounts for the ac and powersteering arn't right or something or another.