6G Celicas Forums

Welcome Guest ( Log In | Register )

> Oil Leak ** NEW UPDATE** ITS OFF, ITS OFF
post Dec 22, 2008 - 10:17 PM
+Quote Post
Tigawoods



Enthusiast
*****
Joined Dec 22, '06
From Columbia, MD
Currently Offline

Reputation: 13 (100%)




well to outline this problem, i have been having an oil leak that has just gotten worse in recent weeks. it is coming from the backside of the engine and drips on the the plastics and the flexpipe.
i am going to be doing an oil dye test tommorow to get more info.

here is where the problem comes
the engine is under warranty at a shop in philadelphia. the last time i had a problem, i had blown a head gasket and they said it was dude to my headers having gasket leak, which i later found out could not happen. it cost me $500 to fix.
this oil problem from what i have been told, could most likely be the rear main seal, which is part of the rebuilt engine as i have assumed. there arent any items that i have added to the car that could effect this. i dont want to get screwed over and told that it was something that i put on to cause this. i just want to take it there and have them fix it (if it is the rear main seal or another engine component)

this needs to be dealt with now so i really need your guys opinions asap
thanks kindasad.gif

This post has been edited by Tigawoods: Jan 2, 2009 - 7:50 PM


--------------------

1995 GT::::Diffusing the Situation
エキサイティングカーレーシングチーム!
march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM
 
Start new topic
Replies
post Jan 2, 2009 - 1:44 PM
+Quote Post
Tigawoods



Enthusiast
*****
Joined Dec 22, '06
From Columbia, MD
Currently Offline

Reputation: 13 (100%)




well right now i am taking off the oil pan.
but i am stuck at the motor mount part. i needed to take a break before i start that. i need to be mentally prepared for it haha.

the shop that i took it to called on tuesday and said that it was the oil pan and that i have a steering fluid leak too.
they said it would be $250 to change. i was like screw that
so i took it from them and started to do it myself. i just need to take off the crossmember and the stiffener plate rear of the oil pan.

after that i will take a look at the pan seals

it is sealed with an actual rubber gasket and not FIPG or RTV sealant.


--------------------

1995 GT::::Diffusing the Situation
エキサイティングカーレーシングチーム!
march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM
post Jan 2, 2009 - 2:19 PM
+Quote Post
samir0189



Enthusiast
****
Joined Mar 8, '08
From Orlando, Florida
Currently Offline

Reputation: 14 (100%)




.

This post has been edited by samir0189: Jan 28, 2009 - 2:49 PM


--------------------
My F/S Thread!

QUOTE
(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.

QUOTE
Ferdi says (11:29)
No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.

Posts in this topic
- Tigawoods   Oil Leak ** NEW UPDATE** ITS OFF   Dec 22, 2008 - 10:17 PM
- - 6GenCelicaST   Just from reading the first line my immediate thou...   Dec 22, 2008 - 10:36 PM
- - Tigawoods   thanks that relieves a little of the stress. how l...   Dec 22, 2008 - 10:42 PM
- - lagos   Mike, you really should have talked to that shop w...   Dec 22, 2008 - 11:19 PM
- - Tigawoods   i know i should of done it before and i am paying ...   Dec 22, 2008 - 11:24 PM
- - lagos   They should be able to diagnose it without droppin...   Dec 22, 2008 - 11:40 PM
- - Tigawoods   i will do that. its just having the holidays comin...   Dec 22, 2008 - 11:43 PM
- - lagos   Its possible that it could just be your oil pan se...   Dec 22, 2008 - 11:47 PM
- - Tigawoods   will do sir   Dec 22, 2008 - 11:50 PM
- - Tigawoods   well it isnt. the valve cover gasket. clean eng...   Dec 24, 2008 - 6:24 PM
- - presure2   that last pic looks like the bottom of your intake...   Dec 24, 2008 - 6:53 PM
- - Tigawoods   i just checked the valve cover and it was fine. i...   Dec 24, 2008 - 7:13 PM
- - Galcobar   Oil pump seal?   Dec 24, 2008 - 11:46 PM
- - lagos   Actually Mike.. that looks a lot like the oil leak...   Dec 25, 2008 - 1:17 AM
- - Tigawoods   i talked to the guys at the shop today. they said ...   Dec 25, 2008 - 1:28 AM
- - lagos   I dont know what the deal is with that shop. First...   Dec 25, 2008 - 1:47 AM
- - Tigawoods   honestly i dont trust this shop. they try to play ...   Dec 25, 2008 - 1:50 AM
- - lagos   Just bring it in.. have them them give you a diagn...   Dec 25, 2008 - 1:54 AM
- - Tigawoods   yeah. im not fooling around with it anymore. i am ...   Dec 25, 2008 - 1:57 AM
- - 808celica   too much autoX????   Dec 25, 2008 - 5:44 AM
- - Tigawoods   not enough autox haha   Dec 25, 2008 - 9:41 AM
- - silver6gc   Im a Toyota Expert Certified tech, 5S-FE's are...   Dec 29, 2008 - 7:09 PM
- - Tigawoods   thanks! i will have to check those out   Dec 29, 2008 - 7:18 PM
- - Tigawoods   well right now i am taking off the oil pan. but i ...   Jan 2, 2009 - 1:44 PM
|- - samir0189   .   Jan 2, 2009 - 2:19 PM
- - lagos   Thats probably why its leaking then, mike. They us...   Jan 2, 2009 - 2:52 PM
- - Tigawoods   kk will do. i will have to pick some up from toyot...   Jan 2, 2009 - 4:07 PM
- - Tigawoods   im going to get some now actually, parts dept. is ...   Jan 2, 2009 - 4:14 PM
- - Tigawoods   so it is off. i took it off and the gasket fell a...   Jan 2, 2009 - 7:49 PM
- - 95st-celica   hopefully thats the culprit...what a PITA...hope y...   Jan 2, 2009 - 8:07 PM
- - Tigawoods   i hope its worth it im cleaning it now and am go...   Jan 2, 2009 - 8:37 PM
- - 95st-celica   turbo?   Jan 2, 2009 - 8:39 PM
- - lagos   Id say you found the problem. Damn those cheap aft...   Jan 2, 2009 - 8:47 PM
|- - 95st-celica   QUOTE (lagos @ Jan 2, 2009 - 8:47 PM...   Jan 2, 2009 - 8:52 PM
- - Tigawoods   i actually took it off the other day a$...   Jan 2, 2009 - 9:55 PM
- - Tigawoods   everything is back on. just letting it settle. hop...   Jan 4, 2009 - 1:14 AM
- - kel026   HI Guys. I'm brand new to this forum, and this...   Jan 5, 2009 - 9:50 AM
- - stephen_lee   QUOTE (kel026 @ Jan 5, 2009 - 10:50 ...   Jan 5, 2009 - 10:47 AM
- - kel026   QUOTE (stephen_lee @ Jan 5, 2009 - 11...   Jan 5, 2009 - 1:23 PM


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 2nd, 2024 - 5:31 PM