![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Dec 9, '05 From Germany Currently Offline Reputation: 0 (0%) ![]() |
Hi, after over a year of gathering parts my Celica finally is in the garage and gets her custom header, exhaust and some other stuff.
Yesterday we fitted the big Evo9 intercooler, i had to get the ST205 crash bar because the stock one is to tight, intercooler piping was done too and i'm very happy with it. I will use the stock ST205 air filter box, since there is not much space between the filter box and the engine, the IC piping is a little bit tricky but it looks like we found a good route. ![]() ![]() ![]() ![]() The header will be done in the next days. ![]() Short list of parts i'm using: - Garrett T25 Turbo from a CA18DET - Mitsubishi EVO 9 Intercooler - E-manage Ultimate - Innovate LC-1 Wideband - ST202 3S-GE Injectors (372ccm) - ST205 Fuel Pump - Bosch Blow-Off from a Audi S3 - Custom Header and 3" Exhaust - dozens of other small parts ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Dec 9, '05 From Germany Currently Offline Reputation: 0 (0%) ![]() |
IT'S ALIVE!!
![]() Today we finaly got everything done what's needed to let the engine run. After 10 minutes wondering why my E-manage and the starter don't work, my friend simply asked me "immobilizer??"... unbelievable how fast you can forget something like that ![]() The engine runs a bit rich at idle and closed loop didn't worked, maybe a problem with the stock lambda probe. Tomorrow we put the car on the dyno and i try to set up the E-manage so that the car will run not too bad with boost, fine tuning will follow the next weeks. Short video and some pics ![]() ![]() ![]() This post has been edited by Hafkai: Jan 19, 2009 - 7:16 PM |
![]() ![]() |
Lo-Fi Version | Time is now: August 18th, 2024 - 8:20 PM |