 Engine mount question |
 Jan 25, 2009 - 7:41 AM
|
 
|
 Enthusiast  Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%)  |
Anyone know how to install safely the main engine mount next to the belts?
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
 |
Replies
|
Jan 25, 2009 - 9:36 PM
|
|
 Enthusiast Joined May 12, '06 From Wilmington, NC Currently Offline Reputation: 45 (100%) |
lift the car slightly and put it on jack stands, take a jack and put a block of wood on it and then lift it up to the oil pan. do not put excessive pressure on it, just enough to support it. Then while you're still under the car, using a ratchet with a long extension and a 14mm deep socket, take out the nut that is on the stud that is on the underside of the engine mount, you may need to take off the belt to get at it, you might also be able to get it with a wrench from up top, but it'll be a pain. then, from the top, there are 2 bolts holding it to the frame and one nut which also supports the power steering fluid resevoir. take them all out, it should come out, then put your new one in.
--------------------  94 GT - Sold -------- 69 Pontiac Lemans - Sold 88 Alltrac - Sold ---- 04 WRX - Sold 00 GT-S - Sold ------ 91 Miata - project/drift car 95 GT - Sold -------- 96 GT - New Daily Drive |
Posts in this topic
trdproven Engine mount question Jan 25, 2009 - 7:41 AM
presure2 QUOTE (trdproven @ Jan 25, 2009 - 7... Jan 25, 2009 - 8:50 AM Bitter i think he's replacing just that mount, suppor... Jan 25, 2009 - 10:42 AM trdproven Just the main mount, I think i have to support it ... Jan 25, 2009 - 4:34 PM trdproven How much leverage would I get to take of the nut f... Jan 26, 2009 - 12:31 AM
6strngs QUOTE (trdproven @ Jan 25, 2009 - 9... Jan 26, 2009 - 2:47 AM trdproven went under there could not see, might need to take... Jan 26, 2009 - 7:24 AM 6strngs QUOTE (trdproven @ Jan 26, 2009 - 4... Jan 26, 2009 - 10:23 AM Dennisj1 Hey 6strngs,
Can you explain how to change rear m... Mar 28, 2009 - 3:41 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 7:40 AM |