![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Dec 9, '05 From Germany Currently Offline Reputation: 0 (0%) ![]() |
Hi, after over a year of gathering parts my Celica finally is in the garage and gets her custom header, exhaust and some other stuff.
Yesterday we fitted the big Evo9 intercooler, i had to get the ST205 crash bar because the stock one is to tight, intercooler piping was done too and i'm very happy with it. I will use the stock ST205 air filter box, since there is not much space between the filter box and the engine, the IC piping is a little bit tricky but it looks like we found a good route. ![]() ![]() ![]() ![]() The header will be done in the next days. ![]() Short list of parts i'm using: - Garrett T25 Turbo from a CA18DET - Mitsubishi EVO 9 Intercooler - E-manage Ultimate - Innovate LC-1 Wideband - ST202 3S-GE Injectors (372ccm) - ST205 Fuel Pump - Bosch Blow-Off from a Audi S3 - Custom Header and 3" Exhaust - dozens of other small parts ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Dec 9, '05 From Germany Currently Offline Reputation: 0 (0%) ![]() |
I finally got the car back and it runs great, the exhaust is relatively quiet but sounds wonderful. The E-manage works great but i have to do some settings till ignition and injection are perfect.. still get some engine knock but not as bad as with the old spark plugs. I just did a short test drive on the Autobahn
![]() short video of 2. - 3. gear, the clutch gripped but the wheels are spinning in 2. gear Link |
![]() ![]() |
Lo-Fi Version | Time is now: June 29th, 2024 - 7:11 PM |