7A-FTE made in Germany Options

[Hafkai]

Hi, after over a year of gathering parts my Celica finally is in the garage and gets her custom header, exhaust and some other stuff.
Yesterday we fitted the big Evo9 intercooler, i had to get the ST205 crash bar because the stock one is to tight, intercooler piping was done too and i'm very happy with it. I will use the stock ST205 air filter box, since there is not much space between the filter box and the engine, the IC piping is a little bit tricky but it looks like we found a good route.









The header will be done in the next days.



Short list of parts i'm using:
- Garrett T25 Turbo from a CA18DET
- Mitsubishi EVO 9 Intercooler
- E-manage Ultimate
- Innovate LC-1 Wideband
- ST202 3S-GE Injectors (372ccm)
- ST205 Fuel Pump
- Bosch Blow-Off from a Audi S3
- Custom Header and 3" Exhaust
- dozens of other small parts

[Hafkai]

I finally got the car back and it runs great, the exhaust is relatively quiet but sounds wonderful. The E-manage works great but i have to do some settings till ignition and injection are perfect.. still get some engine knock but not as bad as with the old spark plugs. I just did a short test drive on the Autobahn i never was that fast on >110mph and the car still pulls very hard, but my clutch decided to die and started to slip real bad.... i'll order a Exedy Stage 2..
short video of 2. - 3. gear, the clutch gripped but the wheels are spinning in 2. gear Link