how to mod a 2.2L 96 celica? |
how to mod a 2.2L 96 celica? |
Jan 31, 2009 - 8:57 PM |
|
Enthusiast Joined Jan 31, '09 From Richmond Currently Offline Reputation: 0 (0%) |
Hey everyone im new here.
im looking for suggestons on how to mod a 2.2L celica. from a 130hp to 200-240hp. any suggestions? everything is stock and i would like to keep that car as N/A not turbo. and if it were to go to 200 - 240hp what other changes should be made to the car to have a great perfomance. Thanks |
Feb 2, 2009 - 10:35 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
you can use the 5s tranny on a 3sg, just build it strong.
Jim - would a 5s need internals to boost? what about pistons? -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Feb 2, 2009 - 2:30 PM |
|
Enthusiast Joined Sep 22, '08 From Bergenfield Currently Offline Reputation: 5 (78%) |
you can use the 5s tranny on a 3sg, just build it strong. You do NOT need to build the 5s trany to support the 3sgte. It has held strong and true on many swpas to 300whp, after that tho.....you should start thinking about swapping to the E153 (can support WELL over 400whp) Jim - would a 5s need internals to boost? what about pistons? No a 5s takes boost pressure VERY well. Both Shannon and Manny are pushing 16.7psi daily on there 100% Stock setups. And when I say stock, I mean stock. Nothing different with the motor then when the day it left from the factory, except for the addition of larger fuel injectors. There is NO need for internal work up until this point. Now how much further you can take it....well that road has yet to be traveled --------------------
|
Feb 3, 2009 - 7:36 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
you can use the 5s tranny on a 3sg, just build it strong. You do NOT need to build the 5s trany to support the 3sgte. It has held strong and true on many swpas to 300whp, after that tho.....you should start thinking about swapping to the E153 (can support WELL over 400whp) Jim - would a 5s need internals to boost? what about pistons? No a 5s takes boost pressure VERY well. Both Shannon and Manny are pushing 16.7psi daily on there 100% Stock setups. And when I say stock, I mean stock. Nothing different with the motor then when the day it left from the factory, except for the addition of larger fuel injectors. There is NO need for internal work up until this point. Now how much further you can take it....well that road has yet to be traveled What I meant by build it up is install clutch and flywheel, beef it. Also, compression was ok on the 5sfe factory? So no need in dropping compression to offset boost? -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Lo-Fi Version | Time is now: November 24th, 2024 - 4:55 AM |