wiring my voltage guage, i no.. im a nub Options

[Nyczroflz]

hey guys i was just wondering on how to wire up my voltage guage... i removed the A pillar n noticed that were wires behind it, however they kinda have the color code of the radio wires, all i need is a constant voltage output and switch output. The wires are also really short so the only place i can wire them into is the radio wire looking thing. I was wondering how u guys did it it. Thanks

[Nyczroflz]

how do i find out with fuse to use?

[SinisterSinner]

how do i find out with fuse to use?

I think a red one with a 10 on it would be fine, but check the gauge and its manuals or anything that came with it to be 100% sure you are using an adequate for it, or if you use a fuse with a 10 on it and it blows, check your connections, if everything is good but the fuse, try a one with a 15 on it, if same happends use a 20 and if it blows too there might be something broken inside the gauge.

PS: when you test the voltimeter gauge if it works fine, try accelerating your car while in neutral and make sure headlights are off, what that does is that it generates more electricity and you would be testing your gauge at the most power you can possibly supply for it, now if the fuse doesnt burns than you know you have the right one.

PS PS:DONT use the fuse that has a 20 on right away without testing the other lower numbers, because the shortcircuit could bypass the fuse if the fuse has more amperage than needed, therefore, "its better to prevent than to regret"

PS PS PS; LOL THIS PS THING IS KIND OF CATCHY LOL

ANYWAY DUDE HOPE i HELPED YOU TODAY ANYMORE QUESTIONS? ill be glad to help(within 30 minutes)im getting sleepy.