Updated Manual Transmission Conversion, Checklist |
Updated Manual Transmission Conversion, Checklist |
Oct 29, 2005 - 5:15 AM |
|
Enthusiast Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) |
Auto/manual conversion checklist:
Manual tranny Flywheel and bolts Clutch kit (and pressure plate bolts) Driver's side mount for manual Shifter assembly Shifter cables Clutch pedal assembly Brake pedal (or grind down your stock one) Clutch master cylinder Clutch slave cylinder (if not included with tranny) Clutch lines Manual ECU or wire in resistor box for the auto ECU I just wanted to put this down so that I don't have to retype it every time someone asks me how to do it Feel free to add thoughts and comments. -Doc This post has been edited by Dr_Tweak: Oct 29, 2005 - 5:16 AM -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
Feb 20, 2009 - 5:43 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
Since completing my conversion I would like to post a more complete and updated listing of what is needed.
Auto to Manual Trans Checklist Manual Transmission Transmission mounts driver side, and rear, might as well change to front manual tranny mount too since they are stronger than auto mount and since auto front mounts break faster when used in manual celicas. Clutch hard lines (custom) or oem donor Clutch Slave Cylinder Clutch Master Cylinder Shifter Cable C-Clips 4 Total Needed (2 on tranny side and 2 on shifter side) Shifter Cables Shifter Assembly Brake Pedal Assembly (Or you can cut your auto ones) Clutch Pedal Assembly Manual Shifter Trim Surround Shift Boot Shift Knob Flywheel and manual flywheel Bolts Clutch Pressure Plate Pressure plate bolts Throwout bearing Starter (Reuse) Manual Transmission Bolts Bell Housing (Reuse) Auto Axles (Reuse) Starter (Reuse) NEW CVBoots - Might as well Manual ECU needed for OBDII Only. If OBDI, you can either get the manual ECU (Expensive), or get the manual cluster, or just remove the auto cluster O/D bulb - reason is because you get the O/D blinking error because your auto ECU is looking for your automatic trans solenoids sensors, which isnt there anymore. Brake Fluid Transmission Oil Don't forget to check if your brake and reverse lights are connected and work. Hope this helps out better. Good Luck to all you swappers. This post has been edited by trdproven: Sep 15, 2009 - 10:50 PM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Lo-Fi Version | Time is now: November 27th, 2024 - 12:00 PM |