![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%) ![]() |
Hello, I am kinda new here. I have a 1994 celica with a 3sgte swap with no engine mods but have a 3 inch dp and full 3 inch exhaust and a fcd, 4 inck air filter with custom air intake pipe and ebay special fmic. What I want to do is upgrade my turbo from the ct26. Dont want a ct27 or rebuild upgrade < figure I will want to upgrade again with these>Can I use any turbo I pick to my liking and bolt to my manifold with a adaptor or get a new manifold as long as I have A external wastegate and the down pipe that bolts to the turbo and exhaust. what I mean is if I have a turbo, wastegate and proper fittment to my manifold it will work? And also Do I have to have a ems to run right with the new turbo,I read that the ecu cuts out at 275 hp is that to the wheels or crank and is it the same for a jdm engine. Also ?i have some bigger injectors on my list to get is this a must with a new turbo?
|
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%) ![]() |
thanks Jim helped out alot. I see you have 330 hp Thats close to where I want to be about 325-375 hp. You say fuel cuts out at 275 is that because of the injectors being 440? If so I cant add bigger injectors and fuel wont cut off? Or in order to go over 275 hp you have to have a ems? Also the ems I was looking at is the hydra nemises. I have a friend with a mr2 he has a rom tuned ecu will that eliminate the 275hp fuel cut off? And just curious what turbo are you running to get 330?
|
![]() ![]() |
Lo-Fi Version | Time is now: February 24th, 2025 - 8:58 AM |